ASRock Vision 3D Series manual Exit Screen

9.8 Exit Screen

BIOS SETUP UTILITY

Main OC Tweaker Advanced H/W Monitor		Boot Security			Exit
	Exit Options		Exit system setup
			after saving the
Save Changes and Exit
			changes.
Discard Changes and Exit
Discard Changes			F10 key can be used
			for this operation.
Load BIOS Defaults
Load Performance Setup Default (IDE/SATA)
Load Performance Setup AHCI Mode
Load Power Saving Setup Default
				Select Screen
				Select Item
			Enter	Go to Sub Screen
			F1	General Help
			F9	Load Defaults
			F10	Save and Exit
			ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Save Changes and Exit

When you select this option, it will pop-out the following message, “Save configuration changes and exit setup?” Select [OK] to save the changes and exit the BIOS SETUP UTILITY.

Discard Changes and Exit

When you select this option, it will pop-out the following message, “Dis- card changes and exit setup?” Select [OK] to exit the BIOS SETUP UTILITY without saving any changes.

Discard Changes

When you select this option, it will pop-out the following message, “Dis- card changes?” Select [OK] to discard all changes.

Load BIOS Defaults

Load BIOS default values for all the setup questions. F9 key can be used for this operation.

Load Performance Setup Default (IDE/SATA)

This performance setup default may not be compatible with all system configurations. If system boot failure occurs after loading, please resume optimal default settings. F5 key can be used for this operation.

Load Performance Setup AHCI Mode

This performance setup AHCI mode may not be compatible with all system configurations. If system boot failure occurs after loading, please resume optimal default settings. F3 key can be used for this operation.

Load Power Saving Setup Default

Load power saving setup default. F6 key can be used for this operation.

5 0