ASRock K8NF6G-VSTA manual Onboard Headers and Connectors, Serial ATA Sata Power Cable

Page 18

2.7 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

 

 

Floppy Connector

 

 

(33-pin FLOPPY1)

 

 

(see p.10 No. 15)

Pin1

FLOPPY1

 

the red-striped side to Pin1

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector.

Primary IDE connector (Blue)

(39-pin IDE1, see p.10 No. 6)

PIN1 IDE1

connect the blue end

connect the black end

to the motherboard

to the IDE devices

80-conductor ATA 66/100/133 cable

Note: Please refer to the instruction of your IDE device vendor for the details.

Serial ATAII Connectors

These Serial ATAII (SATAII)

(SATAII_1: see p.10,No. 4)

 

 

 

 

connectors support SATAII

(SATAII_2: see p.10,No. 5)

or SATA hard disk for internal

 

 

 

 

 

storage devices. The current

SATAII_2 SATAII_1

SATAII interface allows up to

 

 

 

 

 

3.0 Gb/s data transfer rate.

 

 

 

 

 

 

Serial ATA (SATA)

Either end of the SATA data cable

Data Cable

can be connected to the SATA /

(Optional)

SATAII hard disk or the SATAII

 

 

 

 

 

connector on the motherboard.

Serial ATA (SATA)

Power Cable

(Optional)

connect to the SATA HDD powerconnector

connect to the powersupply

Please connect the black end of SATA power cable to the power connector on each drive. Then connect the white end of SATA power cable to the power connector of the power supply.

1 8

Image 18
Contents K8NF6G-VSTA Copyright Notice DisclaimerContents Software Support Appendix AMD’s Cool ‘n’ QuietTM TechnologyPackage Contents IntroductionSpecifications Support CD ConnectorBios Feature HardwarePage CPU Motherboard Layout DDR400HD 8CH I/O Table for Audio Output ConnectionInstallation Pre-installation PrecautionsCPU Installation Installation of CPU Fan and HeatsinkInstallation of Memory Modules Dimm Notch breakInstalling an expansion card Expansion SlotsPCI Express Slots, PCI Slots and Hdmr Slot Easy Multi Monitor Feature Jumpers Setup PS2USBPW1Onboard Headers and Connectors Serial ATA Sata Power CableUSB 2.0 Headers System Panel Header Game Port Header Sataii Hard Disk Setup Guide Western DigitalWhat is Hot Swap Function? Driver Installation GuideWhat is Hot Plug Function? Hot Plug and Hot Swap Functions for Sata / Sataii HDDsHdmr Card and Driver Installation Set Up Bios Use RAID Installation Guide to set RAID configurationMake a Sata / Sataii Driver Diskette Untied Overclocking Technology Bios Menu Bar IntroductionNavigation Keys Main ScreenTo jump to the Exit Screen or exit the current screen Advanced Screen CPU ConfigurationOverclock Mode CPU Frequency MHzCPU/LDT Spread Spectrum Boot Failure GuardPcie Frequency MHz Pcie Spread SpectrumMemory Clock Processor MultiplierProcessor Voltage Flexibility OptionChipset Configuration Acpi Configuration IDE Device Configuration IDE ConfigurationSata Operation Mode OnBoard IDE ControllerDMA Mode LBA/Large ModePIO Mode Block Multi-Sector TransferA.R.T PCIPnP ConfigurationPCI Latency Timer 32Bit Data TransferOnBoard Floppy Controller Floppy ConfigurationSuper IO Configuration Serial Port AddressUSB Configuration Legacy USB Support Boot Security ExitHardware Health Event Monitoring Screen CPU Quiet FanBoot From Network Boot ScreenBoot Settings Configuration Boot Up Num-LockMain Advanced Monitor Boot Change Supervisor PasswordSecurity Screen Save Changes and Exit Load Optimal DefaultsExit Screen Discard Changes and ExitRunning The Support CD Install Operating SystemSupport CD Information Drivers MenuAppendix

K8NF6G-VSTA specifications

The ASRock K8NF6G-VSTA is a notable motherboard that exemplifies a balance of performance and utility, targeted primarily at budget-conscious users seeking to build or upgrade their systems based on the AMD platform. Designed for the AMD Socket 754, this motherboard supports the AMD Sempron and Athlon 64 processors, making it a versatile choice for various computing needs.

One of the standout features of the K8NF6G-VSTA is its compatibility with DDR memory, supporting dual-channel DDR400/333/266 DIMMs. This allows users to take advantage of dual-channel memory technology, which can significantly enhance data throughput and overall system performance. The motherboard supports up to 2GB of memory, which is sufficient for most everyday tasks, including basic gaming, multimedia consumption, and productivity applications.

In terms of connectivity, the ASRock K8NF6G-VSTA is equipped with the NVIDIA nForce 6100 chipset, which not only enhances system stability but also provides integrated graphics capabilities. This chipset allows for decent graphics performance through the integrated GeForce 6150 GPU, making it suitable for users who do not require a dedicated graphics card for their tasks. For those who wish to expand their graphical capabilities, the motherboard offers a PCI Express x16 slot to accommodate external graphics cards.

Storage options are robust with the K8NF6G-VSTA, providing four SATA II ports that support RAID 0, 1, and JBOD configurations, offering flexibility in data management and redundancy. Additionally, the presence of two IDE ports allows for the connection of older PATA drives, catering to users who may still rely on legacy hardware.

The audio features of this motherboard are powered by the Realtek ALC662 codec, delivering 6-channel audio output that enhances multimedia experiences, making it a good choice for home theater setups or gaming. Furthermore, connectivity options extend to integrated Ethernet, providing reliable network access for online activities.

The ASRock K8NF6G-VSTA also incorporates various proprietary technologies such as ASRock Instant Boot and ASRock OC Tuner, allowing users to optimize system performance and boot times effectively. The motherboard design supports several expansion slots for flexibility, including additional PCI slots for legacy cards.

In summary, the ASRock K8NF6G-VSTA presents a compelling option for users in need of a dependable and flexible motherboard solution for AMD processors. With a mix of integrated graphics, ample memory support, and various connectivity options, it caters well to basic computing needs, making it a strong contender in the budget motherboard market.