Lennox International Inc Ellite Series manual Troubleshooting Tips

Page 32

Troubleshooting Tips (Continued)

If . . .

Then . . .

 

 

ait" is displayed

Compressor minimum−off timer is activated.

on the screen.

Wait up to five minutes for the compressor

 

to turn on.

 

 

Fan does not turn on

Check Installer Set−Up 0180: Fan Control in

in a call for heat

Heating*. Make sure Electric Heat option is

(electric furnaces

selected.

only)

 

 

 

Both heating and

Check Installer Set−Up Number 170: Heating

cooling systems are

and/or Cooling Type*. Make sure the setting

operating at the

matches the installed heating and/or cooling

same time.

system.

 

Check to ensure that bare portions of wires

 

are not touching.

 

 

Heating is running in

Check Installer Set−Up Number 170: Heating

Cool mode.

and/or Cooling Type*. Make sure the setting

 

matches the installed heating and/or cooling

 

system.

 

 

Heating system

Check Installer Set−Up Number 170: Heating

does not turn off and

and/or Cooling Type*. Make sure the setting

the heat tempera-

matches the installed heating and/or cooling

ture setting is set

system.

below the room tem-

 

perature ("Heat On"

 

is not shown in dis-

 

play.)

 

 

 

Red LED is lit in the

A system monitor is wired to the thermostat

upper right corner of

L terminal. Refer to suggestions given in

the thermostat when

Heating or Cooling System Does Not Turn

the system monitor

On sections in this table.

detects a possible

 

problem.

 

 

 

*Refer to Installation Instructions for access to Installer Set−Up pro- cedures.

Page 32

Image 32
Contents OWNER’S Guide Table of Contents Thermostat Features Thermostat Display System Shows Current Outside Position Outside Temperature System Settings System SettingsFan Settings FAN SettingsProgram Your Heating and Cooling Schedule Edit the ScheduleMON TUE WED THU FRI SAT MON TUE Saving Changes Fan Schedule Cancel a Schedule Period Set the Time Override Temperature Setting −− Temporary Hold Override Temperature Setting −− Permanent Hold Override Temperature Setting −− Vacation Hold Temperature Recovery Feature Clean the Thermostat Screen Battery Replacement Back of Thermostat Batteries Reminder Timers Built−In Compressor Protection Outdoor Temperature Advanced Heat Pump Features Select ModelsScreen Lock Advanced Settings Done Advanced Settings User Set−Up Select the temperature display to beNot automatically adjusted for Daylight Selection DescriptionMent reminder timer. Options − 10 run time daysSelect option for humidifier pad re − Reminder is offTemp. up and down keys and ability to Enter installer set−up modeModify set−up selections are enabled Troubleshooting Tips Troubleshooting Tips Troubleshooting Tips

Ellite Series specifications

Lennox International Inc., a leader in the heating, ventilation, and air conditioning (HVAC) industry, has taken significant strides in residential comfort with its Ellite Series. This high-performance series is designed to provide homeowners with energy-efficient, reliable, and environmentally friendly heating and cooling solutions.

One of the main features of the Lennox Ellite Series is its impressive efficiency ratings. With SEER (Seasonal Energy Efficiency Ratio) ratings that often exceed 20, these systems represent some of the most efficient air conditioners available on the market. This not only translates into lower energy bills but also contributes to a reduced carbon footprint, making it an attractive option for environmentally conscious consumers.

The Ellite Series incorporates advanced technologies that enhance both performance and comfort. Among these technologies is the variable-speed compressor. This feature allows the system to operate at different speeds based on the heating or cooling demand, providing precise temperature control. By running at lower speeds for extended periods, the system can maintain consistent comfort levels while using significantly less energy.

Additionally, the Ellite Series boasts innovative indoor air quality solutions. Many models come equipped with advanced filtration systems that capture airborne particles, allergens, and pollutants, improving the overall air quality in a home. This is particularly important for households with allergy sufferers, as it helps create a healthier living environment.

The intelligent design of the Ellite Series also emphasizes quiet operation. With noise levels as low as 55 decibels, homeowners can enjoy a comfortable atmosphere without the disruptive sounds commonly associated with HVAC systems. This is achieved through sound-dampening technology and specially designed components.

Another distinguishing characteristic of the Lennox Ellite Series is its connectivity. Many models are compatible with smart home systems and can be controlled remotely through mobile apps. This allows homeowners to monitor and adjust their HVAC settings from anywhere, ensuring optimal comfort and energy savings regardless of their location.

In summary, the Lennox International Inc. Ellite Series stands out for its exceptional efficiency, advanced technologies, focus on indoor air quality, quiet operation, and smart connectivity. These features combine to provide unparalleled comfort and convenience, making it a premier choice for homeowners seeking to enhance their indoor climate while reducing energy consumption. As the demand for sustainable and efficient HVAC solutions grows, the Ellite Series positions itself as a frontrunner in the industry, catering to both modern living and environmental responsibility.