MSI US54G manual Click

Page 25

2.You can build up the Ad-hoc network by clicking Add... in the Preferred Networks field.

Click

3.Set up the Network Name (SSID) and Network Key (if needed) for the network. Then, check the This is a computer-to-computer [ad hoc] network; wireless access points are not used option and click OK to enable the Ad-hoc mode.

Enter a Network

Name (SSID).

Setup the WEP settings for your need.

IMPORTANT

Check this to enable Ad- hoc mode.

Click

20

Image 25

Contents MSI US54G MS-6861 Wireless 11g USB 2.0 Stick Revision History Important Safety Precautions How to Use This Guide Table of Contents Introduction US54G Wireless 11g USB 2.0 StickUS54G How US54G WorksWireless 11g USB 2.0 Stick Specifications System Requirements Package ContentsLED Green Product ViewConnecting US54G Hardware InstallationRemoving US54G Software Installation Click MSI Wireless LAN icon Introduction MSI Wireless LAN iconSwitch to Gateway Mode optional Switch to AP Mode optionalView Available Wireless Networks LanguageTo change the control setting Changing the Control Setting for Windows XP onlyUncheck this option Click Networking Connecting to the Access PointIf you want to configure the network settings Connected To configure the settings Ad-hoc ModeClick Select Click Channel StatusSpeed RadioFragmentation Threshold Power saveRTS Threshold Preamble TypeAuthentication type AuthenticationProfile Information Client for Microsoft Network Checking the Network ElementsFile and printer sharing for Microsoft Networks System Properties window appears choose Computer Name tab Computer IdentificationClick OK to save changes Configuring a Dynamic/Fixed IP Address Click OK to complete the configuration Go to Start Run Checking TCP/IP AddressChecking Connection by Pinging Click the File and Print Sharing option Sharing FilesCheck this Click Share Name Access TypeComment Password