Lorex 24[sy] security surveillance monitor manual Maintenance, Technical Specifications

Page 20

Maintenance

7.Maintenance

Be sure to press POWER to power off the monitor and disconnect the power adapter before cleaning or moving the monitor.

Wipe the monitor with a dry, soft cloth.

If the monitor screen is very dirty, wipe clean with a cloth that has been dipped in a diluted soap-and-water solution and wrung out thoroughly. Then wipe again with a dry cloth.

Do not use alcohol, benzine, thinner, cleaning fluid, or other chemicals to clean the monitor.

Do not use compressed air to remove dust from the monitor.

When removing the monitor base, lay the monitor face down on a soft area to prevent it from getting scratched or damaged.

8.Technical Specifications

Display

23.6" TFT LED

Resolution

H: 1920 V: 1080

Dots Distance

0.27675(H) X 0.27675(V) mm

Visible Range

531.36(H) X 298.89(V) mm

Power Source

12V DC

Power Requirement

3.5A

Power Consumption

up to 42W

Operation Temperature

23° ~ 113°F

 

–5° ~ 45°C

 

 

Dimensions (including stand)

22.6" (L) x 15.4" (W) X 7.5" (D)

 

575mm (L) x 393mm (W) X 190mm (D)

 

 

Weight (approx.)

8.7lbs / 3.9kg

As our products are subject to continuous improvement, Lorex Technology Inc. and its subsidiaries reserve the right to modify product design, specifications, and prices without notice and without incurring any obligation. E&OE

8

Image 20
Contents TFT LED Monitor Risk of Electric Shock Do not Open Need HELP? Necesita Ayuda Before YOU Start Avant DE Antes DE Commencer Empezar Important Safeguards Service Product Information Viii Table of Contents Page Getting Started System comes with the following componentsInstalling the Monitor Stand To install the monitor standConnecting the Monitor MonitorMonitor Overview Using the Menu PictureTracking Using the Vesa Mount Holes Maintenance Technical SpecificationsPage Page Page Expand and Customize Your System