▶CPU Under Voltage Protection [Auto]
Sets the voltage limit for CPU
▶CPU Over Current Protection [Auto]
Sets the current limit for CPU
▶Phase Over Current Protection [Enabled]
Enables or disables the phase
[Enabled] | Sets the current limit on the phase for |
[Disabled] | Disables this function. |
▶CPU Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU Core voltage and minimize ripple range. Increasing the PWM working speed will cause higher temperature of MOSFET. So please make sure a cooling solution is
▶CPU VRM Over Temperature Protection [Enabled]
Enables or disables the CPU VRM
[Enabled] | Sets the temperature limit on CPU VRM for |
| protection. |
[Disabled] | Disables this function. |
▶Digital Compensation Level [Auto]
Sets the current compensation level for CPU PWM when the MOS phases are changed. If set to "Auto", BIOS will configure this setting automatically. Higher compensation level provides more overclocking ability.
▶Imon Overwrite [Auto]
Sets the Imon current for CPU.
[Auto] | This setting will be configured automatically by BIOS. |
[Quarter] | Sets the Imon current into quarter. |
[Half] | Sets the Imon current into half. |
[Disabled] | Sets the default values for Imon current. |
▶Transient Boost [Disabled]
Enables or disables the transient boost.
[Enabled] | Enables this function may lead into a stable system under heavy |
| system loading. |
[Disabled] | Disables this function. |
▶SVID Communication [Auto]
Enables or disables SVID (Serial Voltage Identification) support.
[Auto] | This setting will be configured automatically by BIOS. |
[Enabled] | PWM phase will be changed dynamically according to the CPU SVID |
| (Serial Voltage Identification). |
[Disabled] | Disables SVID (Serial Voltage Identification) support. |
Chapter 3
BIOS Setup |