Getting Started
Power Management
AC Power
It is strongly recommended to connect the AC/DC adapter to the Tablet PC and use the AC power while using this Tablet PC for the first time. When the AC power is connected, recharging the battery will start immediately.
Note that the AC/DC adapter included in the package is approved for your Tablet PC; using other adapter model may damage either the Tablet PC or other devices attached to it.
Do not cover the AC/DC adapter since it may generate a certain heat while in use. Always be aware of heat coming from the AC/DC adapter in use.
Connecting the AC Power
1.Take up the interchangeable plug and look for the groove on the interchangeable plug which can be used for locking on the AC/DC adapter. Then align the groove of the interchangeable plug on the tenon of the AC/DC adapter with correct orientation. Next, rotate the interchangeable plug 90 degrees clockwise until it is fixed on the AC/DC adapter.
2.Plug the Y cable in the Dock Connector of the Tablet PC.
3.Please connect with the external device need in this step.
4.Plug the DC plug of the AC/DC adapter in the power jack of the Y cable and then plug the joined AC/DC adapter in the power outlet.
5.When remove, please follow the steps 432.
Note: i. The interchangeable plug may vary depending on countries or regions.
ii.It is recommended that the source power current should be higher than or equals to 1.5A when using USB charging cable.
iii.The Y cable does not support