BIOS Setup
Floopy Disk Controller
This is used to enable or disable the onboard Floppy controller.
Option | Description |
Auto | BIOS will automatically determine whether to enable the |
| onboard Floppy controller or not. |
|
|
Enabled | Enables the onboard Floppy controller. |
|
|
Disabled | Disables the onboard Floppy controller. |
|
|
Serial Port 1
This item specifies the base I/O port address of the onboard Serial Port 1 (COM A). Selecting Auto allows AMIBIOS to automatically determine the correct base I/O port address. Settings: Auto, 3F8/COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4 and Disabled.
Port2Mode
This item sets the operation mode for Serial Port 2. Settings: Normal,
1.6uS, 3/16 Baud and ASKIR (the last three operation modes are setting options for IR function).
IR Pin Select
Set to IRRX/IRTX when using an internal IR module connected to the IR header. Set to SINB/SOUTB. when connecting an IR adapter to COM B.
Parallel Port
This field specifies the base I/O port address of the onboard parallel port. Selecting Auto allows AMIBIOS to automatically determine the correct base I/O port address. Settings: Auto, 378, 278, 3BC, Disabled.
PortMode
This item selects the operation mode for the onboard parallel port: ECP, Normal,
EPP Version
The item selects the EPP version used by the parallel port if the port is set to EPP mode. Settings: 1.7, 1.9.