Crate & Barrel Brighton Four-Drawer Chest manual Flat washers per side panel as shown

BRIGHTON FOUR DRAWER CHEST

NOTE: Do not over tighten the bolts

left side panel

right side panel

back panel

1Fit dowels of left/right side panels into corresponding holes of back panel, and fasten with 3 bolts, 3 spring washers, and 3 flat washers per side panel as shown. Secure, but do not over tighten, bolts with a phillips head screwdriver.

front frame

2Fit dowels of assembled unit into corresponding holes of front frame, and fasten with 3 bolts, 3 spring washers, and

3flat washers per side panel as shown.

top panel

drawer left side

A drawerfront

NOTE: Do not over tighten the screws

B drawerback

3With the assistance of another adult, position unit upright. Fit dowels of assembled unit into corresponding holes of top panel, and secure with 10 bolts, 10 spring washers, and 10 flat washers as shown.

4A) Fit pre-attached dowels of drawer front into corresponding holes of drawer left side as shown. Secure drawer front with 2 screws, using a phillips head screwdriver. Do not over tighten the screws.

B) Attach drawer back with 2 screws as shown.

Made in Vietnam - r06 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 3