Lenoxx Electronics L30 BF-2 operation manual Parts List, Canada, Propane Conversion Procedure

Page 14

PROPANE CONVERSION

PROPANE CONVERSION PROCEDURE (Only required if Propane gas is used)

This appliance is designed to operate on natural gas, or propane (LP). It is factory set for use with natural gas and requires field conversion for use with propane. The use of other fuels or combination of fuels will degrade the performance of this system and may be dangerous.

The conversion kit provided with this appliance contains components required to convert this appliance from use with natural gas to use with propane (LP) Gas. All of the components in the propane conversion kit must be in- stalled in order for the appliance to operate safely on propane.

Installation Tools / Supplies 7/16” Open end wrench Small standard screwdriver

Pipe sealant compound (must be rated for use with LPG gas)

Parts List

•Propane RB Regulator conversion screw (Red indicates LP gas)

•Burner Orifice (If you are at an elevation above 4500 feet do not use the orifice provided in this kit. Contact your gas supplier to obtain a smaller orifice)

•Pilot Orifice

•Label, Converted to (LP) Propane – Affix to valve

•Label, Converted to (LP) Propane – Affix to stove body

Avertissement: cet équipement de conversion sera in- stallé par une agence qualifiée de service confor- mément aux instructions du fabricant et toutes exi- gences et codes applicables de l’autorisés avoir la ju- ridiction. Si l’information dans cette instruction n’est pas suivie exactement, un feu, explosion ou production de protoxyde de carbone peut résulter le dommages causer de propriété, perte ou blessure personnelle de vie. L’agence qualifiée de service est esponsable de l’installation propre de cet équipment. L’installation n’est pas propre et compléte jusqu’à l’opération de l’appareil converti est chéque suivant les critères établis dans les instructions de propriétaire provisionnées avec l’équipement.

IN CANADA:

The conversion shall be carried out in accordance with the requirements of the provincial authorities having jurisdiction and in accordance with the requirements of the CAN1-B149.1 and .2 Installation code.

La conversion devra être effectuée conformément aux recommandations des autorités provinciales ayant ju- ridiction et conformément aux exigences du code d’installation CAN1-B149.1 ET.2.

PROPANE Conversion Procedure

1.Turn off Gas - Turn gas control knob to the off posi- tion, and shut off the gas supply to the valve. If nec- essary, disconnect appliance from gas supply.

2.Caution: The gas supply shall be shut off prior to disconnecting the electrical power, before proceed- ing with the conversion. Unplug blower power cord.

3.If the installation is at an elevation below 4500 feet, proceed to step 4. If you are at an elevation above 4500 feet, do not use the orifice provided in this kit. Contact your gas supplier to obtain a smaller orifice).

4.Burner Orifice Installation Procedure:

a.Remove glass door.

b.Remove logs, burner cover, and burner.

c.Use a 7/16” open-end wrench to remove gas burner orifice.

d.Replace the burner orifice with the appropriate burner orifice (see instruction #3).

e.Use pipe sealing compound rated for LP gas. BE VERY CAREFUL THAT THE PIPE COMPOUND DOES NOT GET INSIDE OF THE ORIFICE (THIS COULD RESULT IN PLUGGING OF THE ORIFICE). Using a 7/16” open-end wrench to tighten orifice - DO NOT OVER TIGHTEN (finger tight, then 1/2 turn maximum). *Make sure the orifice is inserted fully into the primary air shutter fixed opening.

5.Adjust primary air shutter. Burner Air Shutter open- ing to be: Natural Gas – 1/2 open, Propane 3/4 open. Some adjustment from standard may be nec- essary for the desired flame characteristics (see Burner Flame Appearance, page 15).

6.Replace Pilot Orifice - Using a 7/16” open-end wrench, remove the pilot burner hood. Replace the pilot orifice with the one supplied in the propane conversion kit. Then, reinstall the pilot burner hood. Ensure that the mark on the pilot hood is lined up with the mark on the pilot mounting plate.

PAGE 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Installation and Operation Manual 189122-1050009Important Warnings / Cautions Table of Contents Lowhigh Planning Your InstallationTool / Equipment List Pressure TapsQuestions to ASK the Local Building OFFI- Cial Floor Protection Rear Wall or Alcove CornerExamples of Venting Installation Applications Vertical Vent Termination RequirementsGAS Supply Hookup InstallationPressure Testing Supply Line Size RequirementsDoor Operation Glowing Embers GAS Appliance Final AssemblyInstalling LOG SET Installation Check List Lighting and Shutdown Instructions Gas Control Valve Pilot AssemblyCare and Operation To Turn OFF GAS to the ApplianceBREAK-IN Period Circulation Blower OperationPropane Conversion Parts ListPropane Conversion Procedure CanadaReference Information Burner Flame AppearanceMaintenance Cycle unit a minimum of 2 times Air Shutter AdjustmentPeriodic Check of Pilot and Burner Flames Pilot Flame AppearanceWiring Diagrams GAS Control and Safety System Wiring DiagramTroubleshooting Qualified Technicians Only Replacement Parts Model L30-2 BF Item # Description Catalog #Item # Description Catalog # Model Optional AccessoriesDeluxe Remote Features Safety Test Outages. Remote Control & WallDown Sensor Spill Switch Thermostat CapableSafety / Listing Label Model L30 BF-2 Service and Maintenance LOG Ownership RecordsWest Taft Avenue Orange, CA

L30 BF-2 specifications

Lenoxx Electronics has made a notable entry into the budget audio market with the L30 BF-2, a versatile Bluetooth speaker designed for consumers seeking high-quality sound without breaking the bank. This speaker combines modern technology with user-friendly features, making it an excellent choice for any audio enthusiast.

The L30 BF-2 stands out with its sleek and compact design, making it portable and easy to carry around, whether you're at home, at a picnic, or on a camping trip. Weighing in at a manageable size, it fits effortlessly in a backpack or handbag, allowing you to take your music wherever you go. The speaker is built with a durable exterior, ensuring it can withstand everyday bumps and knocks while maintaining a stylish appearance.

One of the main highlights of the Lenoxx L30 BF-2 is its impressive sound quality. It is equipped with advanced audio technology that delivers clear highs, rich mids, and deep bass, providing an immersive listening experience. The speaker also utilizes a passive radiator design, enhancing the bass response and giving a fuller sound profile, ideal for various music genres.

The L30 BF-2 features Bluetooth connectivity, allowing you to wirelessly connect to your smartphone, tablet, or computer from up to 10 meters away. This seamless pairing process ensures that you can enjoy your favorite tunes without the hassle of tangled wires. Additionally, the speaker supports hands-free calling, letting you take calls without needing to reach for your device.

Battery life is a crucial factor for portable speakers, and the L30 BF-2 does not disappoint. With an impressive playtime on a single charge, you can enjoy your music for hours on end. The device comes with a built-in rechargeable battery, and its charging time is minimal, ensuring it's ready to go when you are.

The Lenoxx L30 BF-2 also features multi-function buttons, allowing users to control playback easily, adjust the volume, and switch between music tracks with just a touch. This user-friendly interface makes it accessible for tech-savvy individuals and those who prefer simplicity.

In conclusion, the Lenoxx Electronics L30 BF-2 is a standout choice for anyone seeking a portable Bluetooth speaker that combines durability, sound quality, and convenience. With its modern design and essential features, it delivers an excellent audio experience suited for various settings, making it a must-have for music lovers on the go.
Top Page Image Contents