Notice OB SEB.qxp:Notice malin A6 10/01/08 9:34 Page 10
Description
1 | - Removable lever | 4 | - Blade |
|
2 | - Hinged magnet | 5 | - Power supply cable storage |
|
3 | - Motor unit | 6 | - Power supply cable | GB |
|
| 7 | - Serrated wheel |
Operation
-Connect the appliance
-Takethe can opener by its handle.
-Lift the lever (fig.1) and raise the hinged magnet (fig. 2).
-Introduce the can in a slightly tilted position, bringing its edge on the serrated wheel
(fig. 3 and 4).
-Lower the lever and press gently, then flip down the magnet: the can will start to turn as soon as the knife enters and cutting will be performed automatically (fig. 5).
-The motor will stop automatically when the lid has been cut.
-Hold the can and raise the lever; the magnet will hold the cut lid (fig. 6).
Practical hints
-If there is an obstacle (bump, notch, weld or tab) on the edge of the can, start opening a little afterwards or open on the other end of the can. Some supposedly “stackable” cans can only be opened on one end (that is the broadest one).
-Aluminium can lids will not be held by the magnet.
-You must hold big food cans with the other hand during operation.
Cleaning
-Disconnect your appliance after use.
-Disassemble the lever by raising it to the maximum and then take it out of its recess by pulling it towards you (fig. 7 and 8)
-Wash the lever in hot soapy water, rinse it and leave to dry fully.
-Use a damp cloth to wipe the motor unit (do not immerse it) and clean the serrated wheel.
-To
-You can stow the power supply cable in the recess provided.
10