Panasonic Complete Guide to Setting Up Your SA-BTX70 Home Theater System

To select these settings, perform steps 1 to 5 (> 34)

“Network”
IP Address/DNS Settings (> 30)
≥Press [OK] to show the following settings.
	Connection Test	— — — —
	IP Address Auto Configuration ( DHCP )	≥On	≥Off
	IP Address	— — —. — — —. — — —. — — —
	Subnet Mask	— — —. — — —. — — —. — — —
	Default Gateway	— — —. — — —. — — —. — — —
	DNS Auto Configuration ( DHCP )	≥On	≥Off
	Primary DNS	— — —. — — —. — — —. — — —
	Secondary DNS	— — —. — — —. — — —. — — —
	Auto Detect Connection Speed	≥On	≥Off
	Connection Speed Setting	≥10BASE Half Duplex		≥10BASE Full Duplex
	This is enabled only when “Auto Detect Connection Speed” is turned “Off”.	≥100BASE Half Duplex		≥100BASE Full Duplex
Proxy Server Settings (> 31)
≥Press [OK] to show the following settings.
	Reset to factory preset	≥Yes	≥No
	Proxy Address	(The initial setting is blank.)
	Proxy Port Number	(The initial setting is “0”.)
	Connection Test	— — — —
Network Service (VIERA CAST) (> 29)
≥Press [OK] to show the following settings.
	Network Lock	≥On	≥Off
	You can restrict using VIERA CAST.	Changing settings (When “On” is selected)
	Follow the on-screen instructions. Enter a 4-digit password with	≥Change Password
	the numbered buttons when the password screen is shown. It
	will be the common password for “DVD-Video Ratings”,
	“BD-Video Ratings” and “Network Lock”.
	≥Do not forget your password.
	Audio Auto Gain Control	≥On	≥Off
	Volume that is different depending on the contents is adjusted
	automatically to the standard volume while using the VIERA CAST.
	≥Depending on contents, this function effect will not work.
	≥Select “Off” when the audio is warped.
	≥This function has no effect when the audio source is 2 ch and
	DOLBY VIRTUAL SPEAKER is activated. (> 15)
	– When the optional wireless system and speaker set is connected,
	this function has no effect when DOLBY PL II is activated. (> 15)
	Reduce to Screen Size	≥On	≥Off
	The screen is displayed reduced so the displayed screen of the
	VIERA CAST does not get truncated.
					operations
	Time Zone	≥GMT s12 to r12
	Set the time zone if necessary.	GMT s7 l MST (Mountain Standard Time)
	By selecting the time zone, it is possible to set the unit’s time to	(The initial setting is “s5”.)
	match your location.	GMT s5 l EST (Eastern Standard Time)
	≥Some VIERA CAST contents require the time zone to be set.	GMT s6 l CST (Central Standard Time)
	Select “On” when using Daylight Saving time.	GMT s8 l PST (Pacific Standard Time)			Advanced
		GMT s9 l AKST (Alaska Standard Time)
		GMT s10 l HST (Hawaii Standard Time)
	DST	≥On	≥Off
MAC Address (> 30)
Displays the “MAC Address” of this unit.
“Others”
Off Timer		≥2 Hours	≥6 Hours	≥Off
Select how long the unit remains on when it is not being used.
≥Effective only when “BD/DVD” or “SD” is selected as source.
Remote Control Code (> 47)		≥Set Code 1	≥Set Code 2
EASY SETUP (> 12)		≥Yes	≥No
You can execute some essential settings for the unit.
Restore Default Settings		≥Yes	≥No
This returns all values in the Setup menu and the on-screen menu,
except for “Remote Control Code”, “On-screen Language”, “IP
Address/DNS Settings”, “Proxy Server Settings”, “Network Service”,
“DVD-Video Ratings” and “BD-Video Ratings” to the default settings.
Firmware Update (> 29)
≥Press [OK] to show the following settings.
	Automatic Update Check	≥On	≥Off
	When this equipment remains connected to the Internet, it will
	check for the latest firmware version when it is turned on and
	you can update it if necessary.
	Update Now	≥Yes	≥No		RQT9479
	You can update the firmware manually.				37