Heat-A-Vent Combination | NuTone 605RP instruction

INSTALLATION INSTRUCTIONS READ & SAVE THESE INSTRUCTIONS!

Heat-A-Vent®

Combination

MODEL: 605RP

LOCATION

1.Mount heater to ceiling joists, or if necessary, to a header installed between joists.

2.Caution: Do not mount heater closer than 12" to a vertical surface. Do not mount over tub or in shower enclosure.

3.Installation in existing construction requires an accessible area above the desired location. Make sure that wiring can be run to the location.

4.For installation in sloped ceilings up to 12/12 pitch.

5.Ductwork must point up.

MOUNTING HEATER HOUSING

NEW CONSTRUCTION

FIGURE 1

Using Hanger Bars

Refer to Fig. 1

1.Insert hanger bars in slots provided in housing.

2.Locate heater housing between joists so that bottom of heater housing is even with the planned finished ceiling.

3.Use screws or nails (not provided) to secure hanger bars to ceiling joists.

Using Side Mounting Tabs

1.Locate heater housing next to ceiling joist.

2.Use wood screws (not provided) through keyhole slots in mounting tabs to loosely attach housing to ceiling joist.

3.Adjust housing so that it will be flush with the finished ceiling. When housing is properly adjusted, tighten screw in slots to secure housing.

EXISTING CONSTRUCTION

1.Determine desired location for heater.

2.Drill a small hole through the ceiling at the desired location and stick a coat hanger or stiff wire through hole into attic to help find the location from above.

3.Check the area above to make sure that wiring can be installed and that the installation will not interfere with existing electrical wiring.

4.From above, place the housing between ceiling joists at the desired location. Using the housing as a template, mark the area to be cut out along the bottom flange of the housing.

5.After making the cutout, install the housing in the opening using the hanger bars or mounting tabs as described above. Make sure that the bottom of the housing is flush with the bottom of the finished ceiling.

605RP specifications

The NuTone 605RP is a versatile and efficient ventilation fan designed to meet the needs of those seeking a reliable solution for indoor air quality. Known for its powerful performance and quiet operation, the 605RP is an excellent option for bathrooms, utility rooms, or any space requiring enhanced air circulation.

One of the standout features of the NuTone 605RP is its robust airflow capacity. With a rating of 50 CFM (cubic feet per minute), this fan effectively removes moisture and unwanted odors, helping to maintain a fresher and healthier environment. This airflow capability is particularly important in areas prone to humidity, such as bathrooms, where excess moisture can lead to mold and mildew growth.

Another key technology integrated into the 605RP is its low-noise operation. Operating at a sound level of only 2.5 sones, this ventilation fan ensures a quiet atmosphere, allowing users to maintain peace and comfort in their spaces. This feature is especially beneficial during nighttime use or in homes where noise levels need to be kept to a minimum.

The design of the NuTone 605RP is another aspect that enhances its appeal. It features a sleek and unobtrusive look that fits seamlessly into a variety of decors. Additionally, the fan comes with an easy-to-install housing, making it a user-friendly option for both contractors and DIY enthusiasts.

The durable construction of the 605RP is also noteworthy. Made from high-quality materials, this fan is built to last, reducing the need for frequent replacements and maintenance. Its energy-efficient design helps in lowering electricity consumption, making it an environmentally friendly choice.

Installation is made simple with the fan’s adjustable mounting brackets, allowing for flexible placement in different ceiling types. The 605RP is compatible with a variety of ducting options, enabling users to customize their setup according to their specific needs.

In summary, the NuTone 605RP serves as an excellent choice for anyone looking for an effective and quiet ventilation solution. With its powerful airflow, low-noise operation, durable construction, and user-friendly design, it stands out as a reliable option for enhancing indoor air quality and comfort.