Raypak Hot Water Energy Management Control manual What Comes with the Control, Manual

Page 4

WHAT COMES WITH THE CONTROL

Before arriving at the job site to begin the installation, it’s important to first inspect the system and determine what materials you will need. Some parts are included with the control while the oth- ers you will need to provide. Check the following list to verify that you received the following parts.

Included in the box

1

Control, 10.5” x 8” x 3.5”

4

Cable Ties,15”, black, -40ºF to 221ºF rated

1

Panel Cover, Metal, 4” x 7.5”

2

Knockout Connectors, 1/2” to romex

4

Mounting Screws, 3/4”

1

Warranty Card

2

Temperature Sensors, Copper housing,10 K

1

Manual

 

Ohm at 25°C

1

24v Grounded Transformer

 

 

 

 

 

 

Other parts you will need

 

 

Cable, twisted pair with shield, stranded, 18

Cable Ties

AWG. Belden type 8208 (braid shield) or 9552

 

 

(2 twisted pairs, foil shield)

Wire Nuts

Thermal Insulation Tape

Heat Conducting Paste

 

 

 

 

Section 2. INSTALLING THE CONTROL

The control should be mounted on a wall, preferably at eye level with AC power as close as pos- sible. Consider the length of cable required for routing along walls, along pipes, and for connect- ing the temperature sensors.

Notice on the bottom of the control that two of the five knockouts have been removed for rout- ing of cables. If you want to use one or more of the other knockouts, these should be removed before mounting the control onto the wall.

ATTACHING THE TEMPERATURE SENSORS

To get an accurate reading of the water temperatures, the sensors must be in good thermal con- tact with the pipe. Follow this procedure when connecting the temperature sensors.

Procedure for Connecting Temperature Sensors to Pipes:

1.Remove any existing insulation.

2.Clean the pipe surface using sandpaper.

3.Apply thermal conducting paste to the pipe surface.

4.Fasten the sensor tightly to the pipe using the black cable tie.

5.Attach 18 AWG shielded cable to the 6 in. leads using wire nuts or electrical tape.

6.Fasten the cable to the pipe using a second black cable tie.

7.Replace the existing insulation or wrap thermal insulation tape around the pipe.

Overlap each turn and DO NOT STRETCH the tape.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents RayTemp Hot Water Energy Management Control SERVICE/RETURN Authorization Procedure Getting Started BIG PictureAttaching the Temperature Sensors Procedure for Connecting Temperature Sensors to PipesWhat Comes with the Control ManualProviding 24 VAC Power to the Control Procedure for Installing Supply Sensor in TankInstallation Layout DIP Switch Settings on Circuit Board Make all adjustments with ALL power offConnecting the Optional Elsa Brand Modem Using the Front Panel to Check Sensors and Relays RT-Relay StatusBuilding or Buying Interface Cables DescriptionRed = Green =Installing PTT Software on Your PC Simulated Front Panel DisplaySpace BackUsing Your PC, PTT and Modem to Call a Control Reading Logged DataPage Front Panel Laptop Screen Selected Quick ReferenceOr PC Key Screen code and description, in sequence of appearance SeeScreen Code and Description First Screen AT POWER-UP Manual OverrideView Sensors and Relays Time and DateSecurity Password Erase Memory / Reset ProgramFront Panel Menu / Lock Supply Temperature Time SchedulePage Return Temperature NO. Default is YESBranch Temperature not Used B0 Select # of Branch Sensors Installed Not usedRelay Sequencing SQ SelectSensor Override Test Savings Test Setup Savings Test ResultsSensor Calibration Location Text Data Modem SetupLapTop FAX Modem Setup and Test Value Transmit Day GraphsOption Transmit Function Pages Status DescriptionWarranty SERVICE/RETURN Authorization Procedure

Hot Water Energy Management Control specifications

Raypak, a leading name in the hydronic heating and hot water markets, has developed an innovative solution for energy management with its Hot Water Energy Management Control system. This advanced control technology is designed to optimize the performance and efficiency of heating systems, making it an ideal choice for commercial and residential applications.

One of the standout features of the Raypak Hot Water Energy Management Control is its ability to integrate with various heating systems, including boilers and water heaters. This flexibility ensures a seamless connection that maximizes energy efficiency across different types of equipment. The system employs advanced algorithms to analyze real-time data, enabling it to adjust operations based on current demand and environmental conditions.

A key characteristic of Raypak’s control system is its user-friendly interface. This interface allows operators to easily monitor and adjust system settings, ensuring that hot water is delivered at the desired temperature without wasting energy. With remote access capabilities, users can manage their systems from anywhere, enhancing convenience and operational oversight.

The technology behind the Hot Water Energy Management Control emphasizes sustainability. By actively managing water temperature and flow rates, the system minimizes energy consumption while maintaining user comfort. Smart scheduling features allow for operation based on peak and off-peak energy rates, reducing operational costs and environmental impact.

Moreover, Raypak’s commitment to reliability and durability is evident in this control system. Built with robust components, the control unit is designed to withstand challenging environments while maintaining consistent performance. This not only extends the lifespan of the system but also ensures that the hot water supply remains uninterrupted.

Another notable aspect of the Raypak energy management system is its compatibility with smart building technologies. As the trend towards smart automation in building management systems continues to grow, Raypak has equipped its control with features that allow it to communicate with other automated systems. This integration facilitates a holistic approach to energy management, optimizing all aspects of facility operation.

In addition to efficiency and integration, Raypak provides comprehensive support and training for its Hot Water Energy Management Control system. This commitment to customer service ensures that users can take full advantage of the system’s capabilities, enhancing both performance and satisfaction.

In conclusion, the Raypak Hot Water Energy Management Control system offers a technologically advanced solution for optimizing hot water heating. With its range of features, emphasis on sustainability, and compatibility with smart technologies, it stands out as a pivotal component for effective energy management in today’s demand-driven environment.
Top Page Image Contents