Cold Water RUN, Raypak’s Cold Water Run system

COLD WATER RUN

For the same reason stated for Cold Water Starts, it is even more important to provide protection against condensation from cold inlet water on systems where the return water temperature to the boiler will always be below the acceptable minimum. Raypak’s Cold Water Run system utilizes a variable-speed pump to inject just the right amount of water from the main system loop into the boiler to maintain the optimum inlet temperature. This approach allows the full capacity of the boiler to be utilized to meet the system load, while at the same time continuously maintaining the opti- mum inlet water temperature to prevent condensation.

Boiler Start-Up Cycle

BLENDED BOILER

INLET TEMP

MIN INLET

TEMP SETTING

SYSTEM RETURN

START-UP

TEMP

TEMPERATURE

TIME

Raypak’s Cold Water Run system:

•Continuously monitors and adjusts inlet water temperature to prevent condensation

•Regulates minimum inlet water temperature regardless of system temperature

•Shuts down boiler if the minimum inlet water temperature is not achieved

•Protects boiler from constant low return water temperatures with its proprietary self-tuning controller

•Utilizes variable-speed injector pump to control boiler loop temperature

•Activates alarm if shutdown occurs (option)

APPLICATIONS

• Pool Heating

• Low-temperature Industrial Process

• Very Low-temperature Return Water

(e.g. convalescent hospital domestic

hot water)