Safety Precautions
Operating Instructions |
Troubleshooting Tips Care and Maintenance
11Child Lock Operation Procedure
1 Press the low and high temperature setting buttons simultaneously for 3 seconds. The unit will respond with beep.
| E |
OD | |
M |
|
H | H | H |
OUT | OUT | OUT |
ROOM TEMP SET TEMP DOOR | ROOM TEMP SET TEMP DOOR | ROOM TEMP SET TEMP DOOR |
After 3 seconds, | After 3 seconds, |
|
it will be shifted. | it will be shifted. |
|
2During Child Lock Operation
➊ Whenever you press any Button on Display Panel, it will immediately display
“
,”which means Display panel is Locked.
❷All the Button on the indoor unit Display panel will not work.
❸ But the Button on the remote controller will work.
3For releasing child lock Operation
Press the low and high temperature setting buttons simultaneously for 3 seconds again.
| E |
|
OD | The unit will respond with beep, Child Lock Operation will | |
M |
| |
|
| |
|
| removed. |
H |
| H | H |
OUT |
| OUT | OUT |
ROOM TEMP SET TEMP DOOR | ROOM TEMP SET TEMP | DOOR | ROOM TEMP SET TEMP DOOR |
After pressing |
| After 3 seconds, |
|
the buttons it will be shifted | it will be shifted. |
| |
immediately |
|
|
|
Auto restart
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate procedures automatically to the previous operating conditions.
14