Panasonic CQ-SRX7000U manual Final Installation, Final Checks, Precautions

Page 38

E N G L

Installation Guide (continued)

I

S

H

33

You can set the unit on the floor and make tempo- rary connections to test the unit. Use electrical tape to cover all exposed wires.

Important: Connect the red power lead last, after you have made and insulated all other connections.

Ground

Connect the black ground lead of the power connec- tor to the metal car chassis.

Speakers

Connect the speaker wires. See the wiring diagram for the proper hookups. Follow the diagram carefully to avoid damaging the speakers and the stereo unit.

The speaker used must be able to handle more than 45 W of audio power. If using an optional audio power, the speakers should be able to handle the maximum amplifier output power. Speakers with low input ratings can be damaged.

the antenna/antenna extension cord. Read the oper- ating and installation instructions of any equipment you will connect to this unit.

Power

Connect the red power lead to the correct car radio wire or to the appropriate fuse port on the fuse block.

If the stereo unit functions properly with all these connections made, disconnect the wires and pro- ceed to the final installation.

❏Final Installation

Lead Connections

Connect all wires, making sure that each connection is insulated and secure. Bundle all loose wires and fasten them with tape so they will not fall down later. Now insert the stereo unit into the mounting collar.

Congratulations! After making a few final checks, you’re ready to enjoy your new auto stereo system.

42

Speaker impedance should measure 4 - 8 Ω, which is typically marked on most speakers. Lower or higher impedance speakers will affect output and can cause both speaker and stereo unit damage.

Caution: Never ground the speaker cords. For example, do not use a chassis ground system or a three-wire speaker common system. Each speaker must be connected separately using parallel insulat- ed wires. If in doubt about how your car's speakers are wired, please consult with your nearest profes- sional installer.

Motor Antenna

Connect the car motor antenna lead to the blue motor antenna relay control lead.

Battery

Connect the yellow battery lead to the correct radio wire or to the battery fuse port on the fuse block.

Antenna

Connect the antenna by plugging the antenna lead into the antenna receptacle.

Equipment

Connect any optional equipment such as an amplifi- er, according to the instructions furnished with the equipment. Leave about 12 inches (30 cm) of dis- tance between the speaker leads/amplifier unit and

❏Final Checks

1.Make sure that all wires are properly connect- ed and insulated.

2.Make sure that the stereo unit is securely held in the mounting collar.

3.Turn on the ignition to check the unit for prop- er operation.

If you have difficulties, consult your nearest autho- rized professional installer for assistance.

❏Precautions

¡Disconnect the cable from the negative battery terminal (see caution below).

¡Unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°.

less than 30°

Caution : Do not disconnect the battery termi- nals of a car with trip or navigational computer since all user settings stored in memory will be lost. Instead take extra care with installing the unit to prevent shorts.

CQ-SRX7000U

Page 37 Page 39
Image 38
Page 37 Page 39
Contents CQ-SRX7000U Safety Information Applies only in U.S.AConsignes de sécurité Before Reading These Instructions Use This Product SafelyComponents Contents Full-dot colorful expressiveness 3D dot matrix display FeaturesYou can remove the panel when you leave your car a Various sound control functionsPoint the remote control Unit at the main units Remote Control PreparationBattery Notes Sensor RemoteGeneral VolumePower SourceDimmer When Power is onWhen Power is OFF Display ChangeRadio Radio ModeTuning BandScanning Manual PresetMemory Track Search Open the Front PanelDisc Insert Track SelectionRandom Play Scan Play Repeat Play Play SettingDirect Play Setting from Remote Control Title Display Title ScrollMemory Card Insert SD Player Mode DisplaySD Player Track SelectionSD Memory Card Data Information Play List SelectionTo Return to All Track Playing CompressionRandom Play When all track playbackWhen play list playback Display all tracks in the play list Play ListSelect Display Menu Pset Pset Select Random Repeat SEL Menu Band SetDisc Selection CD Changer ModeCD Changer Press Menu / SEL during CD changer playing CD Changer Menu DisplayTone Quality Save Your Tone Quality PreferenceSoft Sharp GEQ AdjustmentCalling Back the Preset Tone Quality Sound Image Various SettingsBalance and Fader Bass EnhancementBalance FRONT/REAR Fader Band Set SEL MenuAdjust the center speaker volume Center Speaker Volume LevelCenter Speaker Delay Time Menu Pset Pset Select PreparationsPset / or Band Set SEL Menu Adjust the center speaker volume againSelect Sound Space Reproduction Sound Space Setting DisplayTune Tune Adjust Pset Pset SelectTune / Wide space atmosphere Tune / Narrow space atmosphere Sound Space Type SettingAdjust Bass Control Sub-Woofer VolumeSense of Distance ∞ No Sub-Woofer sound Regular output, high tone includedClock Display Clock AdjustmentContrast Tune / Level up Hour / Minute Switch Hour / Minute AdjustmentTune or Tune / or to change Button Operation Sound Signal/beep soundNavi Mute Security FunctionBand Set SEL Menu Select Security FunctionWritten Data Accessories supplied to SV-SD75 ¡SD Memory Card, 64 MBAbout SD Panasonic Media Manager V2 ¡USB reader/writer devicePlay list Terms for SDSD Memory Card Music listOverview Installation GuideInstallation Hardware Required ToolsConnect All Leads Dashboard SpecificationsIdentify All Leads Final Checks Final InstallationPrecautions Insert Mounting Collar q into the dashboard After installationTive Battery termi Bend the mounting tabs out with a screwTo Remove the Unit Trim PlatePanel Removal Alarm Install Removable Face PlateSecurity Indicator Anti-Theft SystemSupplied hardware Wiring DiagramElectrical Connections Front Speaker Lead Left Combination CD changer CX-DP88U System Upgrade ExampleCD Changer CX-DP88U If You Suspect Something Wrong TroubleshootingPreliminary Steps CommonRadio Sound Setting Remote ControlChanger Error Display MessagesReturn to previous mode ASelect another play list and play it When there is no music in a play listAn error occurs ALoad the card againReset switch MaintenanceCleaning. Never use benzine, thinner or other solvents Product ServicingHow to hold the CD MaintenanceCleaning this unit Disc CleaningGeneral SpecificationsPower Supply Do not use cracked or wrapped cardsCD Player FM Stereo RadioAM Radio SD PlayerPanasonic Canada Inc Panasonic Consumer Electronics Panasonic Sales CompanyElectric Corporation of America Puerto Rico, Inc. PSC San Gabriel Industrial Park, Carolina

CQ-SRX7000U specifications

The Panasonic CQ-SRX7000U is a feature-rich car stereo that designed to enhance the in-car audio experience while boasting an array of modern technologies. As a part of Panasonic's reputable lineup, the CQ-SRX7000U offers both quality sound performance and functionality, making it a popular choice among car audio enthusiasts.

One of the standout features of this model is its powerful amplification system, providing 50 watts per channel output, which ensures clear and crisp audio even at higher volumes. This makes the CQ-SRX7000U capable of driving a wide range of speakers and subwoofers, enhancing the overall sound quality within any vehicle.

The unit incorporates a built-in CD player and is compatible with various media formats, including MP3 and WMA. This versatility allows users to enjoy their favorite music across different platforms. The unit also features an auxiliary input, enabling users to connect their smartphones, MP3 players, or other portable devices effortlessly.

Furthermore, the CQ-SRX7000U utilizes advanced radio tuning technology that provides access to AM and FM bands, as well as the potential for excellent reception performance. The built-in RDS (Radio Data System) feature enhances radio functionality by displaying information such as station identification and song titles.

The user interface of the CQ-SRX7000U is intuitive, featuring a clear, easy-to-read display that ensures accessibility while driving. The layout of buttons and knobs is practical, allowing for swift adjustments to volume levels and track selection without distraction.

For those who seek customization, the CQ-SRX7000U comes with a built-in 3-band equalizer, empowering users to tailor their audio experience according to their preferences. This can significantly enhance the quality of sound depending on the genre of music being played.

Moreover, the unit’s design includes multiple preamp outputs, facilitating easy connections to external amplifiers for those looking to upgrade their sound systems further. This makes it an excellent choice for DIY enthusiasts who wish to build a comprehensive audio setup.

In summary, the Panasonic CQ-SRX7000U combines sound quality, user-friendly functionality, and versatile compatibility, making it a compelling option for anyone looking to upgrade their car's audio system. Its robust features and technologies provide an enjoyable listening experience for all music lovers on the road.
Top Page Image Contents