SVLV8 Installation | Pentair Slide Backwash Valve specs

Page 3

FOR YOUR SAFETY: This product must be installed and serviced by authorized personnel qualiﬁed in pool/spa installation and maintenance. Improper installation and/or operation will void the warranty.

WARNING

Ensure that all electrical power to the system is turned off before approaching, inspecting or troubleshooting any leaking valves that may have caused other electrical devices in the surrounding area to get wet.

This document gives instructions for installing the Jandy Slide Valve. The instructions must be followed exactly. Read through the instructions completely before starting the procedure. Please save these instructions.

The Jandy Slide Valve is designed to be used on either sand or diatomaceous earth (DE) filters with a center to center dimension of eight (8") inches (center of the inlet port to the center of the outlet port). Combined with the Jandy Versa-Coupler, the Slide Valve can be used on filters with center to center dimensions of seven (7") to nine (9") inches.

For Jandy Filters, Slide Valve p/n SVLV8 (with unions) is ready to mount to DEL48 or DEL60 model filters (in which the top port is the filter outlet). If mounting a Jandy Slide Valve on Pentair or Sta-Rite Filters, use a combination of p/n SVLV2 (Slide Valve without unions) and p/n 8044 (Versa-Coupler Kit).

The Slide Valve is a two position valve. The valve handle must be fully extended or fully depressed. This valve can not be throttled. To operate the Slide Valve on a DE filter in normal filtration mode, fully depress the handle. To operate the Slide Valve on a sand filter in normal filtration mode, fully extend the valve handle (see Figure 1).

DE Filter	Sand Filter
Handle fully depressed	Handle fully
(pushed down)	extended
	(pulled up)

Figure 1. Handle Positions - Filter/Circulation Mode(SVLV2 shown)

Section 1. SVLV8 Installation

1.Remove the Slide Valve from the packaging. Twist the handle on the Slide Valve several times to verify that the piston moves freely.

WARNING

2.Turn off all power to the system. For retroﬁt installations only, follow steps "a" through "d". For new installations skip steps "a" through "d" and proceed to step 3.

a.Open the pressure relief valve on top of the ﬁlter. Wait for all air to evacuate the system.

b.If the ﬁlter is below pool level, close the suction and return line valves to isolate the ﬁltration system.

c.Remove the drain plug from the ﬁlter. Let the water drain from the ﬁlter.

d.Remove the existing valve from the ﬁlter.

3.Remove the o-rings (2 total) from the packaging.

4.Place the o-rings on the face of the union tail pieces, where the face of the Slide Valve union will connect to the ﬁlter bulkheads (see Figure 2). Make sure each O-ring is properly seated into the groove of each union tail piece.

Coupling Nut

Union Tail Piece

O-ring

Figure 2. O-ring Placement

Slide Backwash Valve specifications

The Pentair Slide Backwash Valve is a crucial component in the realm of pool maintenance and filtration systems. Designed for efficient water flow management, this valve is ideal for backwashing filters, a process that cleans out the accumulated debris and contaminants from the filtration system, ensuring optimal performance.

One of the main features of the Pentair Slide Backwash Valve is its user-friendly design. The slide mechanism allows for smooth operation, enabling users to easily switch between various functions, including filtration, backwashing, and rinsing. The intuitive lever makes it simple for even novice pool owners to operate the valve without confusion.

Another significant characteristic of the Pentair Slide Backwash Valve is its durable construction. Made from high-quality materials, this valve is designed to withstand the rigors of continuous use and the harsh conditions typical of pool environments. The corrosion-resistant body ensures longevity, providing pool owners with a reliable solution for their filtration needs.

Technologically, the valve employs advanced engineering that maximizes flow efficiency. The streamlined internal design minimizes resistance, allowing for faster backwash cycles and reduced water wastage. This feature not only saves time but also conserves water, an increasingly important consideration for environmentally conscious pool owners.

The Pentair Slide Backwash Valve is also compatible with various pool filtration systems, making it versatile for different applications. Whether you have a sand filter, cartridge filter, or a DE filter, this valve can easily integrate with existing setups, enhancing system functionality.

Maintenance is another key aspect of the Pentair Slide Backwash Valve. It is designed for easy disassembly, allowing for straightforward cleaning and maintenance tasks. Regular upkeep ensures that the valve continues to operate efficiently, preventing issues that could arise from buildup and debris.

In summary, the Pentair Slide Backwash Valve stands out for its combination of user-friendly operation, durable construction, advanced technology, compatibility, and low maintenance requirements. Pool owners looking for an effective and efficient solution for their filtration systems will benefit from investing in this high-quality backwash valve, ultimately contributing to cleaner and clearer pool water.