Before Starting, Starting the Engine | Multiquip QP-3TH instruction

QP-3TH Pump

Starting Instructions

The following instructions are intended to assist the user in starting the QP-3TH Pump. Please read the entire instructions before starting.

Before Starting

Place pump as near to water as possible, on a firm flat, level surface.

To prime pump, remove fill cap and fill pump casing with water.If the pump casing is not filled with water before starting, it will not begin pumping.

WARNING

DO NOT open fill cap if pump is hot! Water inside may be under pressure.

Check for leaks between pump and engine.

Check that all hoses are securely attached to the pump.

Check that the discharge hose is not restricted.

Make sure the suction strainer is clean and securely attached to the water end of the suction hose.

CAUTION

NEVER! operate the pump without water in the casing as this will cause damage to the mechanical seal.

The strainer should be positioned so it will remain completely under water. Running the pump with the strainer above water for long periods can damage the pump.

DANGER

DO NOT pump flammable fluids, corrosive chemicals or fluids containing toxic substances. These fluids can create potentially dangerous health and environmental hazards. Contact local authorities for assistance.

Starting the Engine

1.Place the engine fuel valve lever (Figure 1) to the "ON" position.

2.Move the throttle lever (Figure 2) away from the slow position, about 1/3 of the way toward the fast position.

Figure 2. Throttle Lever (1/3 Start Position)

3.Place the choke lever (Figure 3) in the "OPEN " position if starting a cold engine.

Figure 3. Engine Choke Lever (Open)

4.Place the choke lever (Figure 4) in the "CLOSED " position if starting a warm engine or the temperature is warm.

Figure 4. Engine Choke Lever (Closed)

5.Place the engine ON/OFF switch (Figure 5) in the "ON " position.

Figure 1. Engine Fuel Valve Lever (ON Position)	Figure 5. Engine ON/OFF Switch (ON Position)

QP-3TH specifications

The Multiquip QP-3TH is a robust and versatile portable generator designed to meet the demands of both construction sites and recreational use. Known for its reliability and performance, the QP-3TH stands out for its innovative features, advanced technologies, and user-friendly characteristics.

One of the main features of the QP-3TH is its powerful engine, which is coupled with a high-capacity generator that delivers up to 3,000 watts of continuous power. This makes it ideal for powering tools, equipment, and appliances on the job site, as well as providing electricity for camping, tailgating, or emergency backup. The generator is equipped with a 4-stroke engine, ensuring efficient fuel consumption and less environmental impact compared to two-stroke models.

The QP-3TH incorporates advanced inverter technology, which not only increases fuel efficiency but also guarantees stable power output, making it safe for sensitive electronics. This is particularly beneficial for users who need to power devices such as laptops, smartphones, or medical equipment that require a steady current without fluctuations.

The unit features a compact and lightweight design, weighing in at approximately 75 pounds, which enhances its portability. It comes equipped with built-in handles and a sturdy frame, making it easy to transport and set up. Additionally, the generator's low noise level is a significant benefit, allowing it to operate quietly without disturbing surroundings – a critical factor for use in residential areas or during outdoor activities.

Durability is another hallmark of the QP-3TH, as it is constructed from high-quality materials designed to withstand the rigors of outdoor use and demanding job sites. The generator is also equipped with protective features, including low oil shutdown and overloading protection, ensuring longevity and safeguarding its components.

Furthermore, the QP-3TH provides multiple outputs, including standard AC outlets and USB ports, catering to diverse power needs. Whether powering construction tools, home appliances, or electronic devices, this generator ensures that users have the necessary connectivity and versatility.

In summary, the Multiquip QP-3TH is a powerful, reliable, and portable generator that excels in efficiency and user-friendly design. With its impressive features, advanced inverter technology, and sturdy build, it is an excellent choice for anyone needing dependable power on the go. Whether for construction, recreation, or emergency situations, the QP-3TH proves to be a dependable solution for a variety of power requirements.