Leica GS20 manual Setup, 9.8.5Connecting to WoRCS Real-TimeSatellite RTS

Page 82

9.8.5Connecting to WoRCS Real-Time Satellite (RTS)

2.If the Real-time values are all zero, there is no communication to the real-time beacon module. So you will need to verify the configuration.

3.Escape to the Main Menu and select 8 Setup.

)Verify the user-defined configuration named “WRCSBEACON” is selected; if WRCSBEACON exists and is not selected, highlight and press Enter, otherwise select the default “Beacon”.

4.Press Enter again on the selected configuration to edit the setup values.

5.Expand the Interfaces branch, highlight the Real-time branch and press enter.

6.Make sure the Device is set to RTB, and the port is set WoRCS 2.

7.Escape and save the values, then escape and save the configuration.

)If you are editing a default configuration, you will be prompted to provide a configuration name.

8.Escape to the main menu, and return to the status/ Interface/Real-time branch to check the status of the real- time device. You should now see values for the frequency, bitrate, etc.

9.8.5Connecting to WoRCS Real-Time Satellite (RTS)

If you purchased the Leica Geosystems GS20 with the Wireless real-time Correction System, the WoRCS, you are only steps away from collecting real-time sub-meter data. The WoRCS comes preconfigured with the Bluetooth linked to your GS20.

Leica GS20 Field Guide-1.1.0en

82

Setup

Image 82

Contents Field Guide Leica Geosystems GS20Version Leica Geosystems GS20 Symbols Used in This ManualView of chapters Philosophy of Operation IntroductionThe Leica Geosystems GS20 IntroductionRegistration RegistrationCompany stamp, additional notes/information RegistrationLeica dealer 1. Basic Operation Table of ContentsTable of Contents 2. Data Collection4. Navigation Table of Contents3. Data Management 5. Job Management7. Applications SetupTable of Contents Utilities11.Glossary Table of Contents10.Status 12.Index1.1.1Calibrating the Battery 1. Basic Operation1.1Batteries and Charging Basic Operation1.3.1Accuracy Indicator 1.2Powering On the Unit1.3Icons Figure 1-1 Accuracy Indicator1.3.6Battery and Time Indicators 1.3.2Stop and Go Indicators1.3.3Satellite Indicator 1.3.4Differential Corrections1.4.1Alpha Numeric Keys 1.4Button Functions1.4.2Power Key Basic Operation1.4.5Menu Button 1.4.3Enter and Escape1.4.4Cursor Keys Basic OperationBasic Operation 1.4.6The Main Menu1.4.7Paging Figure 1-3 GS20 Main MenuBasic Operation 1.5Software User Interface1.5.1Map Views Figure 1-4 Mapview Selected and FilteredBasic Operation 1.5.2GPS Symbol and Zoom Controls1.5.3Context Menus The map submenu contains zoom controls forBasic Operation 1.5.4Tables and Filtering1.5.5Filtering 1.5.5.1 Map FiltersBasic Operation 1.5.5.2 Table FiltersData Collection 2. Data Collection2.1Job Management Figure 2-2 Job Management Screenflow2.2.2Adding Background Files to a GS20 Job 2.2Background Files in the GS202.2.1Overview Data Collection2.2.3Creating a Background File in GIS DataPRO 2.2.4Transferring a background FileData Collection Figure 2-4 Creating a backgroundFigure 2-6 Turning off the background 2.2.5Viewing the MapData Collection Figure 2-5 Viewing the Map2.3.1Creating Codelists 2.3Code ManagementData Collection 2.3.3Steps for codelist creation 2.3.2Using the Codelist ManagerData Collection Data Collection 1. Click on Codelist and select New CodelistData Collection 2.3.3.3 Step 3 Creating AttributesFacts About Attributes Figure 2-7 Map SymbologyData Collection Figure 2-8 Transferring Codelists2.4.2Attribution 2.4The Codelist and Occupation2.4.1The Job Codelist 2.4.3Point CollectionFigure 2-11 Example of Dist.Dist O/S Data Collection2.4.3.1 Point Offsets Figure 2-12 Offset Methods GraphicalData Collection 2.4.4Line and Area CollectionFigure 2-13:Line and Area Data Collection 2.4.5Modes of CollectionFigure 2-14 Attribution screen Data Collection 3.1.2Options with a Feature Selected 3.1Philosophy of Feature Selection3. Data Management 3.1.1Options with Nothing Selected3.1.3Options with a Node Selected 3.2Selecting a Feature3.2.1Feature Management Data ManagementData Management 3.2.3Feature Submenu3.2.2Selecting a Node or “Vertex” 3.2.1.1 Table FilteringData Management 3.2.4Node Submenu3.2.4.1 Re-OccupyingNodes Inserting into a Feature Node Mode Feature ManagementFeature Management Data Management3.3.1Purpose of the Geographic Clipboard 3.3Using the Geographic ClipboardData Management Data Management blocks3.3.2Flow of use Sharing a common node between 3.3.3Creating Point Topology Data Management4. Navigation Navigation4.1The Navigation Screen Navigation4.2Waypoint Selection and Management 4.3Creating a new Waypoint featureNavigation 4.4Updating a Navigated Feature NavigationJob Management 5. Job ManagementFigure 5-1 New Job Dialog 5.1.1Introduction 5.1Coordinate SystemsJob Management Job Management 5.1.2Overview5.1.3Attaching a Coordinate System Figure 5-2 Coordinate SystemJob Management 5.1.4Field FileGeoid Field File Job Management Job Management Leica GS20 Field Guide-1.1.0en6.1Creating a New Codelist 6. Codelist ManagementCodelist Management 6.2.1Creating a New Attribute 6.2Creating a New CodeCodelist Management 7.1.2Setup 7. Applications7.1Cultivated Field Control 7.1.1IntroductionApplications All identifiers are listed below7.1.3Using the Program ApplicationsSelect a Tolerance or limit of error ApplicationsApplications Leica GS20 Field Guide-1.1.0enApplications Leica GS20 Field Guide-1.1.0en8.1.1Browser Controls 8. Utilities8.1File Browser 8.1.2Context Menu8.1.5Clear System Memory 8.1.3Firmware Update8.1.4Sensor Transfer Utilities9.1Selecting, Modifying and Creating 9. SetupConfigurations SetupSetup 9.2Tree Directory Navigation9.3Hardware Management 9.3.1Hardware9.3.3.1 Selecting a Wireless Device 9.3.3Wireless Bluetooth ConnectivitySetup 9.3.2Contrast9.3.4Clearing a Selected Device Setup9.3.5Real-TimeCorrections with a Mobile Phone Setup 9.3.6Linking with the Bluetooth9.3.7Configuring your Device Making the connectSetup 9.3.8Modifying your Configuration9.3.9Connecting to the Station 9.3.8.1 Status Indication9.4.1Creating an ID Template 9.4ID Template ManagementSetup 9.4.2Modifying an Existing TemplateSetup 9.5Device Manager9.6GPS 9.5.1Creating a New Device9.6.2Minimum Satellites Setupwhen an antenna has been plugged in or unplugged 9.6.3Antenna Type9.6.5Initialization 9.7Data CollectionSetup 9.7.1Quality MonitorSetup 9.8Interfaces9.8.1Real-Time Setup 9.8.2GS20 Phase Wizard9.8.2.1 Overview 9.8.2.3 Kinematic Phase Setup9.8.2.2 Static Phase 9.8.2.4 The InterfaceSetup Leica GS20 Field Guide-1.1.0enSetup 9.8.3WAAS and EGNOSSetup 9.8.3.1 Understanding the WAAS CorrectionsSetup 9.8.4Connecting to WoRCS Beacon9.8.3.2 Changes to the Real-TimeScreen 9.8.4.1 Powering on the WoRCS Setup9.8.4.2 Checking the Bluetooth Link 9.8.4.3 Checking the WoRCS Real-TimeLink Setup9.8.4.4 WoRCS Real-TimeBeacon Setup 9.8.5Connecting to WoRCS Real-TimeSatellite RTS9.8.5.1 Powering on the WoRCS Setup9.8.5.2 Checking the Bluetooth Link Setup 9.8.5.3 Checking the WoRCS Real-TimeLink Setup8 Setup 9.8.5.4 WoRCS RTS9.8.6.1 Configuration of the GS20 Setup9.8.6Offset Devices Setup Leica GS20 Field Guide-1.1.0enSetup 30’00”Setup Leica GS20 Field Guide-1.1.0enDouble Azimuth or Double Distance SetupReverse Azimuth and Distance 9.8.7ASCII Input SetupTo link an external ASCII Device 9.9.1Units of Measure 9.9Units and FormatsSetup 9.9.2Language10.1.1 Position 10. Status10.1GPS 10.1.2 Satellite Information10.1.3 Satellite View 10.2Interfaces10.3Hardware 10.2.1 Real-Time11. Glossary GlossaryGlossary Dilution of precision DOPGlossary LongitudeSelective Availability Signal to Noise RatioRTCM Time and Initial Position12. Index 733607-1.1.0en