QP-204H General Information, Application

QP-204H — GENERAL INFORMATION

APPLICATION

The QP204H Centrifugal Pump is designed to handle all types of clear water applications. It is ideal for residential use such as dewatering basements and swimming pools. Both the suction and discharge ports on the QP-204H pump use a 2-inch diameter opening, which allows the pump to pump at a rate of approximately 142 gallons/minute (gpm) or 538 liters/minute (lpm).

Centrifugal or self priming pumps are designed to purge air from the suction line and create a partial vacuum in the pump body. The reduced atmospheric pressure inside the pump allows water to flow through the suction line and into the pump body. The centrifugal force created by the rotating impeller pressurizes the water and expels it from the pump.

Power Plant

This centrifugal pump is powered by an 4.0 horsepower air cooled 4-stroke, single cylinder HONDA GX-120gasoline engine that incorporates a low "Oil Alert Feature"

Oil Alert Feature

In the event of low oil or no oil, the HONDA GX-120 engine has a built-in oil alarm engine shut-down feature. In the event the oil level is low the engine will automatically shut-down.

Standard Centrifugal Pump

Standard centrifugal pumps provide an economical choice for general purpose dewatering. These types of pumps should only be used in clear water applications (agricultural, industrial, residential) as they have a limited solid handling capability of only 10% by volume.

Suction Lift

This pump is intended to be used for dewatering applications and is capable of suction lifts up to 25 feet at sea level. For optimal suction lift performance keep the suction hose or line as short as possible. In general, always place the pump as close to the water as possible.

Pump Support

The pump should always be placed on solid stationary ground, on a level position.

NEVER place the pump on soft soil. The suction hose or pipe connection should always be checked for tightness and leaks. A small suction leak in the hose or fittings could prevent the pump from priming.

Elevation

Higher elevations will effect the performance of the pump. Due to less atmospheric pressure at higher altitudes, pumps DO NOT have the priming ability that they have at sea level. This is due to the “thinner air” or lack of oxygen at higher altitudes.

A general rule of thumb is that for every 1,000 feet of elevation above sea level a pump will lose one foot of priming ability.

For example, in Flagstaff, Arizona where the elevation is approximately 7,000 feet, the pump would have a suction lift of only 18 feet rather than the 25 feet at sea level. Table 3 shows suction lift at various elevations.

Table 3. Suction Lift at Various Elevations

Altitude			Suction Lift in Feet (Meters)
Feet (Meters)			Suction Lift in Feet (Meters)
Feet (Meters)

Sea Level	10.0 (3.048)		15.0	(4.572)	20.0 (6.096)		25.0 (7.620)

2,000 (610)	8.80	(2.680)	13.2	(4.023)	17.6	(5.364)	22.0 (6.705)

4,000 (1,219)	7.80	(2.377)	11.7	(3.566)	15.6	(4.754)	19.5	(5.943)

6,000 (1,829)	6.90	(2.103)	10.4	(3.169)	13.8	(4.206)	17.3	(5.273)

8,000 (2,438)	6.20	(1.889)	9.30 (2.834)		12.4	(3.779)	15.5	(4.724)

10,000 (3,048)	5.70	(1.737)	8.60 (2.621)		11.4	(3.474)	14.3	(4.358)

Table 4 shows percentage drops in performance as elevation increases.

Table 4. Performance Loss at Various

Elevations

Altitude	Discharge Flow	Discharge Head
Feet (Meters	Discharge Flow	Discharge Head
Feet (Meters

Sea Level	100%	100%

2,000 (610)	97%	95%

4,000 (1,219)	95%	91%

6,000 (1,829)	93%	87%

8,000 (2,438)	91%	83%

10,000 (3,048)	88%	78%

PAGE 12 — QP-204H CENTRIFUGAL PUMP — OPERATION AND PARTS MANUAL — REV. #3 (06/05/06)

QP-204H specifications

The Multiquip QP-204H is a powerful and versatile portable generator designed to meet the needs of various applications, from construction sites to outdoor events. As a part of Multiquip's lineup of reliable power equipment, the QP-204H combines innovation, efficiency, and durability to deliver exceptional performance.

At the heart of the QP-204H is a robust Honda GX160 engine, known for its reliability and fuel efficiency. This 4-stroke, air-cooled engine offers a maximum output of 2,400 watts and a rated output of 2,000 watts, ensuring that users have ample power for their equipment and tools. The generator is also equipped with a large-capacity fuel tank, allowing for longer run times without the need for frequent refueling.

One of the standout features of the QP-204H is its lightweight and compact design, weighing just 60 pounds. This portability makes it easy to transport to different job sites or recreational areas. Additionally, the generator is equipped with a convenient built-in handle, further enhancing its ease of mobility.

The QP-204H incorporates advanced noise-reduction technology, making it one of the quieter options available on the market. With a noise level of just 58 dBA at a distance of 7 meters, it is ideal for outdoor activities where noise restrictions may apply. This feature ensures that users can enjoy power without disturbing the surrounding environment.

Safety is also a priority with the Multiquip QP-204H. The generator includes a low-oil shutdown system that automatically turns off the engine in case of low oil levels, helping prevent damage and ensuring prolonged operation. This attention to detail helps to give users peace of mind while using the equipment.

The QP-204H offers multiple outlet options, including 120V AC, making it compatible with a variety of devices and appliances. This versatility allows users to utilize the generator for various tasks, from powering power tools on job sites to providing backup power during outages.

In conclusion, the Multiquip QP-204H stands out as a compact, reliable, and efficient portable generator. With its Honda engine, low noise levels, safety features, and multi-outlet capabilities, it is a go-to solution for both professionals and outdoor enthusiasts alike. Whether it’s job site power needs or recreational activities, the QP-204H is designed to deliver dependable performance in any situation.