Model CKT-240

Operational Check

After installing your keypad, check the operation by entering the door number and pressing Open, Close or Stop. Operation should be reliable. However, environmental conditions and the location of the keypad and or receiver will affect distance.

•If the keypad doesn’t activate the operator check the door number. The door number entered must exactly match the door number by the receiver.

•Press the STOP/ON button and wait a seconds before entering your door number. Press the keys slowly.

•If the distance is inadequate check the battery and replace if necessary.

•To maximize the operating distance move the keypad to different locations until a satisfactory distance is achieved. Metal and some types of construction will affect distance.

•If system does not work at any distance, check that the operator is properly operating from the wall station and any other hand-held transmitters.

•Try to erase the receiver and re-lean the door number and any additional hand- held transmitters.

WARNING

Manufacturer’s Limited Warranty

Allstar warrants its radio controls to be free from defect in material and workmanship for a period of one (1) year from the date of purchase. To obtain service, contact your dealer.

To obtain service under this warranty the buyer must obtain authorization instructions from Allstar for the return of any goods before returning the goods. The goods must be returned with complete identification, with copy of proof-of-purchase, freight prepaid and in accordance with Allstar’s instructions or they will not be accepted. In no event will Allstar be responsible for goods returned without proper authorization or identification.

Goods returned to Allstar for warranty repair within the warranty period, which upon receipt by Allstar are confirmed to be defective and covered by this limited warranty, will be repaired or replaced at Allstar’s sole option, at no cost and returned pre-paid. Defective parts will be repaired or replaced with new or factory rebuilt parts at Allstar’s sole option.

This limited warranty does not cover non-defect damage, damage caused by unreasonable use, damage caused by improper installation or care, vandalism or lightning, fire or excessive heat, flood or other acts of God (including, but not limited to misuse, abuse or alterations, failure to provide reasonable and necessary maintenance), labor charges for dismantling or reinstalling a repaired or replaced unit, or replacement batteries.

These warranties are in lieu of all other warranties, either expressed or implied. All implied warranties of merchantability and/or fitness for a particular purpose are hereby disclaimed and excluded. Under no circumstances shall Allstar be liable for consequential, incidental or special damages arising in connection with the use or inability to use this product. In no event shall Allstar’s liability for breach of warranty, breach of contract, negligence or strict liability exceed the cost of the product covered hereby. No person is authorized to assume for Allstar any other liability in connection with the sale of this product.

This warranty gives you specific legal rights. Warranty effective after August 1, 2004.

MVP Commercial

Keypad Transmitter

Installation Instructions

Proper installation of your radio controls will assure years of

trouble-free operation

READ THE FOLLOWING INSTRUCTIONS THOROUGHLY

BEFORE STARTING INSTALLATION

The MVP Commercial Keypad Transmitter is designed to remotely operate MVP Quik-Code Receivers. When used with a 3-channel receiver, the keypad permits the user to operate up to 240 different door operators with open, close and stop functions. The radio frequency of the remote controls is fixed and tuned at the factory; adjustments are not required and should not be attempted by the end user.

WARNING

of the reach of children. or remote controls.

injury or property damage. can be accidentally or

Features of the Commercial Keypad Transmitter

ON/STOP: This key turns on the keypad and light system allowing you to operated the system as well as to see the keys in the dark. The keypad will remain active and lights will remain lit for 45 seconds after the last key is pressed.

3-Button Operation Mode: Once you have entered a valid 3-digit door number, the door is activated by pressing either Open, Close, or Stop button. Until another door number is entered or the keypad times-out (keypad lights turn off), the same door may be reactivated by pressing either Open, Close or Stop.

Low Battery Indicator: The lighting for your keypad also serves as a low battery indicator. When the keypad lights flash on and off the battery should be replaced with a alkaline 9 volt battery.

Non-Volatile Memory: It is not necessary to reprogram the keypad after you replace your battery.

Allstar MVP Quik-CodeTransmitters and Receivers are

compatible with HomeLink®.

HomeLink® is a registered trade mark of Johnson Controls.

CKT-240 specifications

Johnson Controls has long been recognized as a leader in building efficiency and automation solutions, and their CKT-240 model is a prime example of this commitment to innovation. The CKT-240 is a state-of-the-art control system that allows for seamless management of heating, ventilation, and air conditioning (HVAC) systems, as well as other building systems, ensuring optimal performance and energy efficiency.

One of the main features of the CKT-240 is its advanced control capabilities. It integrates multiple control strategies and algorithms, enabling precise regulation of temperature, humidity, and air quality. With this level of control, building managers can maintain a comfortable environment for occupants while minimizing energy consumption. The CKT-240 also supports a variety of HVAC equipment types, making it highly versatile for different building types and sizes.

Connectivity is a cornerstone of the CKT-240’s design. It is equipped with multiple communication protocols, including BACnet, Modbus, and LonWorks. This allows for easy integration with existing building management systems, and ensures that data can be exchanged effortlessly between devices. The system's open architecture promotes scalability, meaning that it can be expanded and upgraded as technology evolves or as building needs change.

In addition to its robust control features, the CKT-240 incorporates advanced sensors and data analytics capabilities. These technologies enable real-time monitoring of system performance and environmental conditions, facilitating proactive maintenance and troubleshooting. By analyzing this data, building managers can make informed decisions, optimize energy usage, and extend the lifespan of HVAC equipment.

The CKT-240 also places a strong emphasis on user experience. Its user interface is intuitive and user-friendly, allowing operators to easily navigate through the system settings and configurations. Enhanced visualizations and dashboards provide valuable insights at a glance, streamlining operations and improving decision-making processes.

In conclusion, Johnson Controls' CKT-240 exemplifies cutting-edge technology in building management systems. Its advanced control strategies, seamless connectivity, data analytics capabilities, and user-centric design make it an ideal choice for those looking to enhance energy efficiency and occupant comfort in their buildings. As the industry moves towards smarter and more sustainable solutions, the CKT-240 stands out as a valuable tool for maximizing building performance.