General Information

ACCESSORY KIT INSTALLATION MANUAL

ELECTRIC HEATER ACCESSORY – ECL SERIES

FOR USE WITH MODELS: AHX61D4PH21 AND AHX61D4P121

ELECTRICAL SHOCK HAZARD

Installation or repairs made by unqualified persons can result in hazards to you and others. Installation must conform with local building codes or, in the absence of local codes, with National Electrical Code ANSI/NFPA 70-current edition and Fire Codes, NFPA 90A and 90B.

The information contained in this manual is intended for use by a qualified service technician familiar with safety proce- dures and equipped with the proper tools and test instru- ments.

Shut OFF electric power at unit disconnect and/or service panel before beginning the following procedures.

Failure to carefully read and follow all instructions in this man- ual can result in malfunction, property damage, personal injury, and/or death.

Verify edges of foil faced insulation are not in contact with any exposed electrical connections.

A means of strain relief and conductor protection must be pro- vided at the supply wire entrance into cabinet.

Use copper conductors only.

This instruction covers the physical installation of the following electric heaters with AHX61 single piece air handlers. These electric heat accessories are used for applications of cooling with electric heat and heat pump with electric heat. Refer to unit instructions for electrical specifications.

TABLE 1: Kits Available

Kit Part #	Description
S1-ECL05	5KW Heat Strip w/ Circuit Breaker
S1-ECL10	10KW Heat Strip w/ Circuit Breaker
S1-ECL15	15KW Heat Strip w/ Circuit Breaker
S1-ECL20	20KW Heat Strip w/ Circuit Breaker
S1-ECL25	25KW Heat Strip w/ Circuit Breaker
S1-ECL30	30KW Heat Strip w/ Circuit Breaker

INSTALLATION

1.Refer to Table 1 for appropriate kit.

2.Check kit for physical damage, do not install damaged kit.

3.Remove the upper access panel from air handler.

4.Unplug the Mate-n-Lock connector (Refer to Figure 3) and Remove block-off plate or existing heater kit from air han- dler by removing 6 screws. See Figure. 2.

5.Slide the heater kit into the slot and secure element plate to divider deck with the 6 previously removed screws.

6.Insert power leads into the circuit breaker lugs or terminal block and tighten. See Figure. 3.

7.Connect ground wire to ground lug. See Figure. 3.

8.Plug in the Mate-N-Lock connector.

9.Break out appropriate number of circuit breaker openings on the access panel of the air handler.

10.Mark an X in the appropriate box on the indoor unit data plate for the particular heater installed.

FIGURE 2:

FIGURE 3:

FIGURE 1:

Subject to change without notice. Published in U.S.A.	669864-UAI-A-1210
Copyright © 2010 by Johnson Controls, Inc. All rights reserved.	Supersedes: Nothing

Johnson Controls Unitary Products

5005 York Drive

Norman, OK 7306

S1-ECL30, S1-ECL05, S1-ECL20, S1-ECL25, S1-ECL10 specifications

Johnson Controls is a leader in the field of building technologies and solutions. The company offers an extensive range of products designed to enhance efficiency, sustainability, and safety in various settings. Among their offerings are the S1-ECL25, S1-ECL30, S1-ECL20, S1-ECL05, and S1-ECL15, which are sophisticated control devices that cater to diverse operational needs.

The S1-ECL series is primarily built to optimize HVAC systems, ensuring they operate at peak efficiency. One of the main features of these controllers is their cutting-edge temperature control technology. This technology allows for precise temperature adjustments, creating a comfortable environment while minimizing energy consumption. Additionally, these controllers are equipped with advanced algorithms that adapt to changing conditions, ensuring performance remains consistent over time.

Another key characteristic of the S1-ECL devices is their easy integration with existing building management systems. The controllers support various communication protocols, which makes it convenient to connect with other components of the building automation system. This seamless interoperability facilitates centralized monitoring and control, allowing facility managers to oversee multiple HVAC units from a single interface.

Reliability is another hallmark of the S1-ECL series. These units are designed to withstand various environmental conditions, ensuring long-lasting performance in both commercial and industrial applications. Built with durable materials and components, they require minimal maintenance, which results in lower operational costs.

The S1-ECL series also emphasizes user-friendly interfaces. Each model features intuitive controls and displays, allowing users to quickly adjust settings as needed without extensive training. This ease of use is especially beneficial for facility staff who need to manage complex systems with minimal downtime.

In summary, the Johnson Controls S1-ECL25, S1-ECL30, S1-ECL20, S1-ECL05, and S1-ECL15 series embody the company's commitment to innovation in building technologies. They provide exceptional features such as advanced temperature control, seamless integration, and robust reliability. With a user-friendly design, these controllers not only enhance comfort but also contribute to energy efficiency and operational effectiveness in modern facilities.

ACCESSORY KIT INSTALLATION MANUAL

ELECTRIC HEATER ACCESSORY – ECL SERIES

FOR USE WITH MODELS: AHX61D4PH21 AND AHX61D4P121