Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
◆You purchase the air conditioner
◆ The remote control does not work correctly
Note ◆ Use two AAA, LR03 1.5V batteries.
◆ Do not use old batteries or different kinds of batteries together.
◆Batteries may be completely discharged after 12 months, even
◆if they have not actually been used.
1Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it.
2Insert the two batteries, taking care to respect the polarities :
◆ + on the battery with + on the remote control. ◆ - on the battery with - on the remote control.
3Close the cover by sliding it back until it clicks into place.
Installing the Remote Control Holder
1Place the remote control holder on the wall.
2 Fix the remote control holder by tightening the screws.
3 Put the remote control into the holder as shown in the figure.
◆ If you want to install the holder easily, you had better install the holder on the wooden frame.