operating your air conditioner
SELECTING operation MODE
Cooling
Transform a hot and humid room into a cool haven quickly by closing all unnecessary openings such as fireplace dampers, doors, or windows in the room before running the air conditioner to increase efficiency and save energy.
1. Turn on the air conditioner.
Press the Power 
button on the remote control.
You will hear two short beeps and the air conditioner will turn on.
2. Set the operating mode.
Press the Cool button on the remote control to select Cool mode.
icon will appear on the display.
3.Set the temperature.
Press the Temp button on the remote control.
Press or button to increase or decrease the desired temperature.
You can set the desired temperature within the range of 18˚C~ 30˚C in Cool mode.
You can increase/decrease the temperature in 1˚C units.
4.Set the fan speed.
Press the Low/Med/High button on the remote control.
One of the following icons will appear on the display.
Low fan speed is activated.
Medium fan speed is activated. High fan speed is activated.
•When you are using the remote control, make sure corresponding icon appears on the display.
•If current outside temperatures are much higher than the selected indoor temperature, it may take time to bring the inner temperature to the desired coolness.
•Air flow can also be adjusted manually. (See page 15 for instructions.)
•Avoid drastically turning down the temperature. Energy is wasted and the room does not cool faster.