Samsung AW14PH Series, AW10PK Series, AW122PB Airing Your Room, To set the fan speed to... Then

Airing Your Room

If the atmosphere in your room is stale, you can air it using the Fan feature and if necessary, evacuate the stale air outside.

1 If you wish to evacuate stale air outside, push the ventilation lever on the

front of the unit to the right and the open position ( ).

Result: The air inside the room circulates and stale air is evacuated

outside.

Otherwise, push the ventilation lever to the left and the closed position ( ).

Result:	The air simply circulates inside the room.
			Remote Control Control Panel
2 If necessary, press the		(On/Off) button.
Result:	The air conditioner starts up in the Cool mode.
	The unit beeps twice.

3If the FAN indicator is not lit up on the unit:

Press the button on the remote control or

Press the button on the unit one or more times until the FAN indicator lights up

Result: The unit beeps each time you press the / button. The air conditioner starts up in Fan mode.

You can change modes at any time.

When the air conditioner is in the Fan mode, the temperature is not dis played; in this case, you do not need to set the temperature.

4 To set the fan speed to... Then...

Press the	,	or	button on the remote control as desired.
or
Press the		button on the unit one or more times until the

desired fen speed(F1, F2, or F3) is displayed.

: Low Speed

: Med Speed : High speed

5To control the direction of the air flow, refer to page 11.

E-9

DB98-26004A.indd 9

2006-12-5 16:37:28