Setting the Sleep Timer

The Sleep Timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of six hours.

Note	If you wish to switch the unit off at a specific time, refer to
	page 19.

1Make sure that you have selected either COOL or HEAT mode.

2Press the button one or more times until appears on the

remote control.

Result: ◆ The indoor unit beeps.

◆ The air conditioner will be controlled as indicated in the illustrations below.

Cooling The desired temperature is increased by 1°C every hour. When it has been increased by 2°C (after two hours), the temperature is maintained for four hours.

	2° C
	1° C
Set
TEMP.	1hr	2hr	6hr
	Start		Stop
	time		time

Heating The desired temperature is decreased by 1°C every hour. When it has been decreased by 2°C (after two hours), the temperature is maintained for four hours.

	Start		Stop
	time		time
Set	1hr	2hr	6hr
TEMP.	-1°C
	-1°C
	-2°C

To Cancel the Sleep Timer

If you no longer wish to use the Sleep Timer that you have set, you can cancel it at any time.

Press the button.

Result: ◆ The indoor unit beeps.

◆The is no longer displayed.

◆The air conditioner operates normally.

E-20