Airing Your Room
If you want to provide air circulation without cooling, you can use the Fan mode.
1 If you wish to evacuate stale air outside, push the ventilation lever on the
front of the unit to the right and the open position (
).
Result: The air inside the room circulates and stale air is evacuated
outside.
Otherwise, push the ventilation lever to the left and the closed
position ( | ). |
Result: | The air simply circulates inside the room. |
Remote Control | Control Panel |
2 If necessary, press the 
(On/Off) button.
Result: | The Air Conditioner starts up in Cool mode. |
The unit beeps twice.
3If the Fan Speed(F1, F2 or F3) is not displayed on the control panel:
Press the 
button on the remote control
or
Press the
Cool/Dry/Fan | button on the unit one or more times until the Fan Speed |
Mode |
|
(F1, F2 or F3) is displayed. | / |
| button. | |
Result: | The unit beeps each time you press the | Mode | ||
Cool/Dry/Fan
The Air Conditioner starts up in Fan mode.
You can change modes at any time.
When the Air Conditioner is in Fan mode, the temperature cannot be set or displayed.
4To set the Fan Speed:
Press the | , | or | button on the Remote control as desired. |
or |
|
|
|
Press the | Fan Speed | button on the unit one or more times until the | |
desired Fan Speed(F1, F2 or F3) is displayed.
5To control the direction of the air flow, refer to page 11.