Panasonic SC-PM10 Recording CDs, Normal recording, To record programmed tracks

2

4

3

Recording CDs

Normal recording

•Tracks are recorded in the order in which they are found on the CD.

•Tracks are cut in the middle when the end of the tape is reached.

•You can record from any point on the tape.

1 Insert the cassette to be recorded on.

(\ page 15)

2 Press [STOP L] to select the CD mode.

3 Press [OPEN/CLOSE c] to open the CD tray.

Insert the CD with label facing upward.

Press [OPEN/CLOSE c] to close the CD tray.

2 STOP

3 OPENCLOSE

4 REC

REC

4 Press [[REC/ J] to start recording. The recording will start from the first track.

To stop recording
Press [STOP L].
The recording and the CD will stop.	operations
To stop recording temporarily
Press [[REC/ J].
To resume recording, press [[REC/ J].	Recording
To record from a specific point on a tape

Before recording, advance the tape to the point from where you want to start recording.

To record programmed tracks

1After step 3, program the track(s) you want (\ steps 2-4

on page 14).

2 Press [[REC/ J] to start recording.

17

RQT6682