Setting the On Timer
|
| The OnTimer enables you to switch on the air conditioner automatically after | |||
Remote Control | Control Panel | a given period time.You can set the period of time from 1 hour to 24 hours. | |||
You can select the OnTimer only when the air conditioner is off. | |||||
|
| ||||
|
|
|
| ||
|
| 1 | Check that the air conditioner has been switched off; if necessary, | ||
|
|
| press the | (On/Off) button. | |
2 Set the operating time by pressing:
on the remote control. or
on the unit one or more times.
Possible time is between 1 hour and 24 hours inclusive.
Result: | The remaining time is displayed and decreased by 1 hour |
| automatically to indicate the remaining time. |
| The air conditioner switches on automatically when the |
| operating time reaches zero. |
You can change the fan speed and others after setting the On Timer.
To Cancel the OnTimer
To cancel the On Timer, press:
on the remote control or 
on the unit one or more times until " 
" is displayed.
or
(On/Off) button on the remote control or unit.