Samsung UMF26C2E3, UMF30C2E4 manual Temperature and Humidity Ranges, Cleaning Your Air Conditioner

Page 20

Temperature and Humidity Ranges

The following table indicates the temperature and humidity ranges within which the air conditioner can be used.

If the air conditioner is used at...

Then...

 

 

 

 

High temperatures

The automatic protection feature may be triggered and the air conditioner stopped.

 

 

 

 

Low temperatures

A water leak or some other malfunction may occur if the heat exchanger freezes.

 

 

 

 

High humidity levels

Water may condense on and drip from the surface of the indoor unit if it is used for long periods.

 

 

 

 

 

 

 

 

Mode

Indoor Temperature

Outdoor Temperature

Indoor Humidity

Cooling

18°C to 32°C approx.

21°C to 43°C approx..

80% or less

Drying

18°C to 32°C approx.

18°C to 43°C approx..

-

If the cooling operation is used at over 33°C(indoor temperature) then, it does not cool at its full capacity.

Cleaning Your Air Conditioner

✴✴✴09/12✴✴✴

✴✴✴18✴✴✴

Hook

To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter.

IMPORTANT

Before cleaning your air conditioner, ensure that you

 

have switched off the breaker used for the unit.

✴✴✴09/12✴✴✴

1Open the front grille by lifting the tabs on the lower right and left sides of the indoor unit.

2Disassemble the front grille by pulling it forwards.

3Hold the edge of the air filter under the front grille and pull to release them.

4Remove all dust on the air filters with a vacuum cleaner or brush.

5Clean the front panel with a damp cloth and mild detergent (do NOT use benzene, solvents or other chemicals).

6Reassemble the air filters and the front grille.

✴✴✴18✴✴✴

1

Open the front grille by pulling on the tabs on the lower right and left

 

sides of the indoor unit.

 

 

2 The removal of the front grille facilitates your cleaning the air conditioner. After

 

opening the front grille, lift up to the max, and pull to release them and vice versa.

 

 

 

3

Lift out the bottom edge of the air filters and pull down to release them.

 

 

 

4

Remove all dust on the air filters with a vacuum cleaner or brush.

 

 

 

5

When you have finished, insert the top part of the filters into their slot

 

and push down on the bottom edge until they click into place.

 

 

 

6

Clean the front panel with a damp cloth and mild detergent (do NOT use

Front grille

Body groove

benzene, solvents or other chemicals).

Note

If you have not used the air conditioner for a long period of time, set the fan

 

going for three to four hours to dry the inside of the air conditioner thoroughly.

E-20

Image 20
Contents OWNER’S Instructions Safety Precautions Contents Timer indicator View of the UnitOutdoor Unit Remote Control Buttons and Display Getting Started Inserting the Remote Control Batteries Installing the Remote Controller HolderUsing with the indoor unit Selecting with the Remote ControlWay Function To obtain an Then selectSelecting the Automatic Operating Mode Cooling Your Room Changing the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Vertically Adjusting the Air Flow Direction HorizontallySetting the On Timer To Cancel the On TimerSetting the Off Timer To Cancel the Off TimerSetting the Sleep Timer To Cancel the Sleep TimerOperating Recommendations Topic RecommendationTemperature and Humidity Ranges Cleaning Your Air ConditionerMode Indoor Temperature If the air conditioner is used at ThenSolving Common Problems Installing a Filter Option Technical Specifications Model Power SupplyThis AIR Conditioner is Manufactured by