Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
◆You purchase the air conditioner
◆ The remote control does not work correctly
Note ◆ Use two AAA, LR03 1.5V batteries.
◆ Do not use old batteries or different kinds of batteries together.
◆Batteries may be completely discharged after 12 months, even
◆ if they have not actually been used.
1Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it.
2 Insert the two batteries, taking care to respect the polarities : ◆ + on the battery with + on the remote control.
◆- on the battery with - on the remote control.
3Close the cover by sliding it back until it clicks into place.
Installing the Remote Control Holder
1Place the remote control holder on the wall.
2 Fix the remote control holder by tightening the screws.
3 Put the remote control into the holder as shown in the figure.
◆ If you want to install the holder easily, you had better install the holder on the wooden frame.