Samsung AP500PF installation manual Cooling Your Room

Page 11

Cooling Your Room

You must select the COOL mode if you wish to adjust the:

Cooling temperature

Fan speed when cooling

1If necessary, press the ON/OFF( ) button.

Result:The power indicator on the control panel comes on.

The indoor unit beeps twice.

The operation mode previously set is displayed.

The air conditioner starts up in the mode selected when the unit was last used.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Switched on

Stopped

It will start up normally after a three-minute rest period.

2If the COOL indicator is not displayed, press the MODE button one or more times until it appears.

Result:The indoor unit beeps each time you press MODE.

The air conditioner starts up in COOL mode. To operate the unit by remote control, press the COOL button.

Note You can change modes at any time.

3If the “SET TEMP” and “TEMP” indicators are not displayed, press the TIME/TEMP. SELECT button to appear it.

4To adjust the temperature, press the TIME/TEMP. or buttons one or more times until the required temperature is displayed.

Possible temperature are between 18°C(65˚F) and 30°C(86˚F) inclusive.

Result:

Each time you press the TIME/TEMP. or .

 

- The temperature is adjusted by 1°C(1˚F)

 

- The indoor unit beeps.

 

The air conditioner will only start cooling if the room

 

temperature is higher than the selected temperature.

5Select the fan speed by pressing the FAN SPEED button one or more times until the required setting is displayed:

Low

Medium

High

To select the fan speed by remote control, press LOW, MID or HIGH buttons.

Note

Each time you press FAN SPEED, the indoor unit beeps.

6To control the air flow direction when necessary, refer to page 14.

E-11

Image 11
Contents OWNER’S Instructions Safety Precautions Contents View of the Indoor unit and Outdoor unit Control Panel Remote Control ButtonsGetting Started Inserting the Remote Control Batteries Then Setting the TimeOperating Preparation Using the Control Panel on the Indoor UnitUsing the Remote Control You can start the air conditioner in Auto mode Selecting the Automatic Operating ModeCooling Your Room Changing the Room Temperature Quickly Airing Your Room Adjusting the Air Flow Direction Vertically Adjusting the Air Flow Direction HorizontallyCancelling the Off Timer Setting the Off TimerOperating Recommendation Temperature and Humidity RangeCleaning Your Air Conditioner An unnecessary call Solving Common ProblemsAP500PF AX500PF Technical SpecificationMethod Installation Others Accessory Parts ListiConnection Parts Outdoor Unit PlaceIndoor Unit Electrical Work Electric power specElectricali Work When connecting 3Phase 3wires 208 ~ 230V ACInstallation Procedures Installationi MethodConnection of Refrigerant Piping Installationi I MethodRat-prevention Cover Drilling a Hole in the WallDrain Hose Fixing to the floor AIR Purge Refrigeranti Chargingi Check Check and Test OperationTest Operation Check and Test OperationiMemo This AIR Conditioner is Manufactured by

AP500PF specifications

The Samsung AP500PF is an innovative air purifier designed to deliver cleaner air and enhance indoor environments. With a sleek and modern design, the AP500PF is not just an effective air cleaning solution but also an aesthetically pleasing addition to any room.

One of the standout features of the AP500PF is its advanced multi-layer filtration system. This system includes a pre-filter, a HEPA filter, and an activated carbon filter, working together to capture a wide range of airborne pollutants. The pre-filter effectively traps larger particles such as dust and pet hair, while the HEPA filter is capable of capturing 99.97% of particles as small as 0.3 microns, including allergens, pollen, and smoke. The activated carbon filter helps eliminate odors and volatile organic compounds, ensuring that the air emitted is fresh and clean.

The AP500PF also incorporates Samsung's proprietary technology, which includes the Digital Inverter technology. This technology allows the air purifier to operate more efficiently, reducing energy consumption while maintaining powerful performance. The device automatically adjusts its fan speed based on current air quality, providing optimal purification without excessive noise, making it suitable for use at night or in quiet settings.

Another notable feature is the Smart Wi-Fi connectivity, which allows users to manage the air purifier remotely through the Samsung SmartThings app. Users can monitor air quality levels, adjust settings, and schedule operation from their smartphones. The device is also compatible with voice control through platforms like Amazon Alexa, making it convenient to use.

The AP500PF is designed with user convenience in mind, featuring an easy-to-use touch control panel that displays real-time air quality readings. It also comes with a filter replacement indicator, alerting users when it’s time to change the filters, ensuring the device continues to operate at peak efficiency.

Overall, the Samsung AP500PF air purifier combines advanced technologies with practical features, making it a top choice for anyone looking to improve their indoor air quality. With its powerful filtration system, smart capabilities, and user-friendly design, it stands out as a reliable device for maintaining a healthy living environment.