Installation Instructions
3PREPARE AIR CONDITIONER (CONT.)
DInsert the frames of the accordion panels into the top and bottom mounting rails. Attach the accordion panels to the side of the case using 6 type A screws.
Top mounting rail
Accordion panels
4INSTALL AIR CONDITIONER IN WINDOW
ACut the window sash seal to the window width and stick the adhesive side to the bottom of the sash.
Window sash seal
BPlace the air conditioner on the stool with the bottom mounting rail against its back edge. Center it and close the window securely behind the top mounting rail.
It should be level or slightly tilted to the outside. Use a level; about a 1/3 bubble will be the correct case slant to the outside.
4INSTALL AIR CONDITIONER IN WINDOW (CONT.)
CExtend the left and right accordion panels to the vertical window sashes and attach with 4 type B screws. Attach the top mounting rail to the sash with a type B screw.
Type B
screw
Type B screws
Type B screws
Type B screw
Attach the brackets to the stool on both sides using two type B screws.
5INSTALL SECURITY BRACKET AND FOAM TOP WINDOW GASKET
AAttach a security bracket with a type B screw.
BCut the foam top window gasket to the window width.
CStuff the foam between the glass and the window to prevent air and insects from getting into the room.
The installation is now complete.
13