GE AMH10, AMH12 owner manual Safety Precautions

Page 3

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Safety Instructions

■ This air conditioner must be properly

installed in accordance with the Installation Instructions before it is used.

■Repair or replace immediately all electric service cords that have become frayed or otherwise damaged.

■Turn the mode control to OFF and unplug your air conditioner before making any repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

Operating

USE OF EXTENSION CORDS

The use of an extension cord is not recommended. However, if an extension cord is required to reach the nearest wall receptacle, use only a UL-listed, 3-wire, grounded, 14 gauge, 15A, 125V appliance extension cord.

USE OF ADAPTER PLUGS

Instructions Installation

Because most 2-prong outlets are not grounded, we strongly advise against using an adapter plug. However, a temporary connection may be made where local codes permit and if the 2-prong wall outlet is properly grounded. UL-listed adapters are available at most hardware stores.

When you plug the adapter in, make sure the larger prong goes into the larger slot to provide the proper polarity for the power cord.

For Proper Grounding:

■Screw the adapter to the outlet, using the outlet cover screw.

■Ground the outlet through the house wiring.

When disconnecting the power cord from the adapter, hold the adapter close to the outlet while pulling the plug out. If this is not done, the grounding connector is likely to break with repeated use.

If the grounding connector breaks, DO NOT USE the air conditioner until a proper ground has again been made.

Instructions Troubleshooting

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

3

Tips

Customer Service

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Pub. No -7371 F561535 CG Room Air ConditionersCongratulations You Are Now Part of the GE Family GE & You, a Service PartnershipSafety Precautions Temp Control Mode ControlAbout the controls on the air conditioner Cooling DescriptionsAir Direction Exhaust ControlAir Filter Care and cleaning of the air conditionerGrille and Case Outdoor CoilsRead these instructions completely and carefully Preparing to install the air conditionerParts Included Window Installation InstructionsWindow Requirements Storm Window RequirementsFront Grille Remove the Air Conditioner From the Case Prepare the CaseInstall the Case in the Window Install the PanelsInstall the Air Conditioner in the Case Installation InstructionsThrough-the-Wall Installation Prepare and Install the Case in the WallFinish the Wall Opening Normal Operating Sounds Before you call for service…Air Conditioner Warranty GE Will Replace, At No Charge To YouWhat GE Will Not Cover GE Answer Center Service Telephone Numbers

AMH10, AMH12 specifications

The GE AMH12 and AMH10 are sophisticated air handling units designed for a variety of commercial and industrial applications. These units are particularly known for their efficiency, versatility, and advanced features, making them suitable for maintaining optimal indoor air quality in a wide range of environments.

One of the standout features of the GE AMH12 and AMH10 models is their modular design. This allows for easy customization to meet specific air handling requirements, whether for a large commercial space or a smaller facility. The modular construction also simplifies transportation, installation, and future expansion.

Both the AMH12 and AMH10 units are equipped with high-efficiency EC fans that significantly reduce energy consumption while ensuring optimal air circulation. These fans operate quietly, making them ideal for noise-sensitive environments like schools, hospitals, and offices. The improved energy efficiency not only helps in reducing operational costs but also contributes to environmental sustainability.

In terms of technologies, both models use advanced controls that allow for precise management of temperature and humidity levels. The intuitive interface enables users to monitor and adjust settings remotely, enhancing convenience and operational efficiency. Additionally, the units are equipped with smart sensors that detect changes in the indoor air quality, triggering automatic adjustments to maintain a comfortable environment.

The AMH12 and AMH10 also feature advanced filtration systems that effectively capture airborne particulates, allergens, and pollutants. Their multi-stage filtration process ensures that the air circulated within buildings is clean and healthy, promoting better health and productivity for occupants.

Another notable characteristic of these units is their compatibility with various HVAC systems, enabling them to integrate seamlessly into existing setups. Both models can be configured for fresh air intake, helping to improve air quality further by reducing the concentration of indoor air pollutants.

Reliability and durability are also hallmarks of the GE AMH12 and AMH10. Constructed with high-quality materials and designed to withstand demanding indoor conditions, these units require minimal maintenance while providing consistent performance over time.

In conclusion, the GE AMH12 and AMH10 air handling units exemplify modern HVAC technology, combining efficiency, customizable design, and cutting-edge features. Their capabilities make them an excellent choice for facilities aiming for superior air quality and energy savings.
Top Page Image Contents