GE AGQ18, agv18, AGM14, AGM18 Before YOU Begin, Electrical Requirements, Tools YOU will Need

Page 9

Installation Instructions

Air Conditioner

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these

instructions for local inspector’s use.

•IMPORTANT — Observe all governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Approximately 1 hour

•We recommend that two people install this product.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

ELECTRICAL REQUIREMENTS

Some models require a 115/120-volt a.c., 60 Hz grounded outlet protected with a

15-amp time delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt a.c., protected with a time delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

CAUTION:

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems—consult a qualified electrician.

TOOLS YOU WILL NEED

Phillips head screwdriver

Flat-blade screwdriver

Pencil

Ruler or tape measure

Level

Scissors or knife

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Write the model and serial numbers here Model # Serial # Air ConditionersConsumer Support Troubleshooting Tips Safety PrecautionsInstallation Instructions OperatingGe.com Remote Control Instructions Troubleshooting Tips Consumer Support Safety InstructionsMode Controls InstallationInstructions Consumer SupportAir Direction-Side-to-Side SafetyGrille and Case Care and cleaning of the air conditionerOutdoor Coils Air FilterBefore YOU Begin Electrical RequirementsTools YOU will Need Parts Included Installation InstructionsStorm Window Requirements Window RequirementsPrepare the Window and the Case Remove the AIR Conditioner from the CasePrepare the Window Install the Case in the WindowInstall the AIR Conditioner in the Case Install a Support Bracket and the Foam TOP Window GasketProblem Possible Causes What To Do Troubleshooting TipsNormal Operating Sounds Before you call for service…We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Air Conditioner Warranty What Is Not CoveredGE Will Replace Parts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design StudioAcondicionadores de Aire Instrucciones de Operación ¡ADVERTENCIAInstrucciones Apoyo al consumidorAl consumidor Solución de problemas Instrucciones de SeguridadControl remoto De problemas Controles de modo InstalaciónInstrucciones Dirección del aire-lado a ladoPrecaución no opere el Cuidado y limpieza del acondicionador de aireParrilla y caja Bobinas para exterioresRequisitos Eléctricos Antes DE IniciarPartes Incluidas Herramientas QUE NecesitaráRequisitos DE UNA Ventana DE Tormentas Requisitos Para LA VentanaRetire EL Acondicionador DE Aire DE LA Caja Prepare LA Ventana Y LA CajaInstale LA Caja EN LA Ventana Prepare LA VentanaInstale EL Acondicionador DE Aire EN LA Caja LA VentanaProblema Causas posibles Qué hacer Solucionar problemasSonidos de operación normales Instrucciones de Seguridad OperaciónInstrucciones de Operación Instalación NotasSolución de problemas Instrucciones de Instalación Operación GE reemplazará Garantía de su acondicionador de aire de GELo que no está cubierto Garante General Electric Company. Louisville, KYSolicite una reparación Apoyo al consumidor Página Web de GE AppliancesGarantías ampliadas Piezas y accesorios
Related manuals
Manual 16 pages 55.38 Kb

AGM18, AGM14, AGQ18, agv18 specifications

The GE AGV18 and AGP18 series represent advanced solutions in the realm of gas turbines, featuring sophisticated engineering and cutting-edge technologies designed for optimal performance in power generation and mechanical drive applications. These turbines are renowned for their reliability, efficiency, and environmental stewardship, catering to industry demands for sustainable energy solutions.

One of the standout features of the AGV18 and AGP18 series is their high thermal efficiency. This is achieved through an advanced combustion system that allows for a more complete and cleaner burn of the fuel, thereby reducing emissions of nitrogen oxides (NOx) and other pollutants. The AGV18, with its innovative dry low NOx (DLN) combustors, exemplifies GE's commitment to meeting stringent environmental regulations without compromising performance.

Another significant characteristic of these turbines is their robust design, which empowers them to operate effectively in various conditions including extreme temperatures and pressures. This durability not only extends the lifespan of the turbines but also minimizes maintenance needs, significantly lowering operational costs for users.

The AGV18 and AGP18 also incorporate GE's proprietary aerodynamics and materials technology, which enhance performance and efficiency. The precision-engineered blades are made from advanced alloys that can withstand higher temperatures and stresses, enabling the turbines to achieve peak performance while maintaining reliability and longevity.

A distinctive feature of the AGP18 is its adaptability to different operational frameworks, including combined cycle applications, which allow for greater flexibility in power generation. This versatility is key in today's ever-changing energy market, where the ability to adapt to diverse fuel sources and operational demands is a substantial advantage.

In addition to their technical specifications, GE's AGV18 and AGP18 series are backed by comprehensive lifecycle services and support, including advanced digital monitoring technologies. These include Condition Monitoring Systems (CMS) that utilize big data analytics and predictive maintenance strategies to enhance operational efficiency and minimize downtime.

Overall, the GE AGV18 and AGP18 turbines epitomize modern engineering excellence, merging efficiency, reliability, and sustainable practices. They stand as a testament to GE's pioneering role in the energy sector, dedicated to providing innovative solutions that meet the current and future needs of power generation worldwide.
Top Page Image Contents