Safety Precautions

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

Care and Cleaning Operating Instructions

■ Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the mode control to OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

Instructions

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Consumer Support Troubleshooting Tips Installation

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord may include a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

AGX08 AGX10 specifications

The GE AGX08 and AGX10 are advanced gas turbine models designed to deliver superior performance and efficiency in power generation applications. Built by General Electric, these turbines are part of GE's portfolio of cutting-edge energy solutions, showcasing the company's commitment to innovation and sustainability.

One of the standout features of the AGX series is its high efficiency. The AGX08 and AGX10 turbines utilize advanced aerodynamics in their blade designs, which significantly enhances their operational efficiency. This high-efficiency operation translates to lower fuel consumption and reduced greenhouse gas emissions, making them an environmentally friendly choice for power producers.

The turbines are equipped with GE's latest combustion technology, which allows them to operate on a wide range of fuels, including natural gas and liquid fuels. This versatility not only helps to optimize fuel costs but also provides flexibility in operations, enabling facilities to adapt to changing fuel availability and market conditions.

The AGX08 and AGX10 models feature an advanced digital control system that leverages GE's expertise in digital technology. This system provides real-time monitoring and optimization of performance parameters, ensuring that the turbines operate at peak efficiency under varying load conditions. Additionally, the digital controls facilitate predictive maintenance, which minimizes downtime and operating costs.

Another significant characteristic of the AGX series is its modular design. This modularity allows for easier maintenance and quicker upgrades as new technologies and improvements become available. The turbines can be incorporated into various power plant configurations, whether for combined cycle, simple cycle, or distributed generation applications.

In terms of reliability, the AGX08 and AGX10 turbines are built to withstand rigorous operational demands. They are tested under extreme conditions to ensure their robust performance over extended periods. This reliability minimizes the total cost of ownership, making them an attractive option for power producers looking to maximize their operational efficiency.

Furthermore, both models are designed with sustainability in mind. They align with global trends toward cleaner energy sources, supporting the transition to a low-carbon future. The AGX08 and AGX10 turbines exemplify GE's dedication to providing innovative, efficient, and environmentally responsible energy solutions. With their impressive features and technologies, these gas turbines are poised to play a crucial role in the energy landscape for years to come.