GE AZ75E18DAC warranty Overall Unit Dimensions, Specification Created 8/02, Front, Sides

Page 1

GE Appliances

AZ75E18DAC – GE Vertical Packaged Terminal Air Conditioner

Overall Unit Dimensions

32 1/4” H

23 1/8” W

23 1/8” D

230/208 Volt

Line Cord Connected Units

Power Connection Kit

RAK3152

RAK3202

RAK3302

 

 

 

 

Heater KW

2.55/2.09

3.45/2.82

5.00/4.09

 

 

 

 

Min. Circuit Amps

15

20

30

 

 

 

 

Recommended

15 Amp

20 Amp

30 Amp

Protective

Time Delay

Time Delay

Time Delay

Device

Fuse or Breaker

Fuse or Breaker

Fuse or Breaker

Specification Created 8/02

Minimum Clearances:

Front

Allow 4 inches in front of unit. When determining closet depth, note that plenum may protrude into closet up to 4 inches, depending on wall depth.

Sides

Allow 3 inches on each side of unit.

For side access closets only: Allow 5 inches on the side where access is required.

Platform

An 8"-12" high, field-supplied platform is recommended for drain access.

ZONELINE ® WARRANTY *

WHAT IS COVERED

LIMITED 2ND THROUGH

FULL ONE-YEAR WARRANTY

5TH YEAR PARTS WARRANTY

For the second through the fifth year

For one year from date of original purchase,

from date of original purchase, General

we will provide, free of charge, parts and

Electric will provide, free of charge, parts

service labor on site to repair or replace

that fail as a result of a manufacturing

any part of the Zoneline that fails

defect. Parts covered are fan motors,

because of a manufacturing defect.

switches, heater, heater protectors,

 

ADDITIONAL FOUR-YEAR WARRANTY

compressor overload, solenoids, circuit

boards, auxiliary controls, thermistors,

For an additional four years from the

frost controls, capacitors and varistors.

date of original purchase, we will provide,

This is a limited parts-only warranty, and

free of charge, parts and on-site service

does not include labor or transportation

labor to repair or replace any part of

to and from the service shop.

the sealed refrigerating system (the

All warranty service will be provided by

compressor, condenser, evaporator and

all connecting tubing) that fails because

our Factory Service Centers or by our

of a manufacturing defect.

authorized Customer Care® servicers

*SEE WRITTEN WARRANTY FOR DETAILS

during normal working hours.

 

For answers to your Monogram,® GE Profileor

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

Image 1
Contents Specification Created 8/02 Overall Unit DimensionsFront SidesFeatures and Benefits