Panasonic SC-PM321 FM/AM Radio, Manual tuning, Memory preset, FM allocation setting

FM/AM Radio

Numeric

buttons

Manual tuning

1	Press [TUNER/BAND] to select “FM” or “AM”.
2	Press [PLAY MODE] to select “MANUAL”.
3	Press [ /4] or [ /¢] to select the frequency of
	the required station.

“ST ” is displayed when a stereo FM broadcast is being received.

To tune automatically

Press [/4] or [/¢] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it fi nds a station.

•Auto tuning may not function when there is excessive interference.

•To cancel auto tuning, press [/4] or [/¢] once again.

To improve FM sound quality

Press and hold [PLAY MODE] to display “MONO”.

To cancel

Press and hold [PLAY MODE] again until “MONO” disappears.

•MONO is also canceled if the frequency is changed.

•Turn off “MONO” for normal listening.

Memory preset

Up to 15 stations can be set in both the FM and AM bands.

Preparation

Press [TUNER/BAND] to select “FM” or “AM”.

Automatic presetting

Press and hold [PROGRAM] to start presetting.

Manual presetting

1	Press [PLAY MODE] to select “MANUAL”.
2	Press [ /4] or [ /¢] to tune to the required
	station.
3	Press [PROGRAM].
4	Press the numeric buttons to select a channel.
	The station occupying a channel is erased if another
	station is preset in that channel.
5	Repeat steps 2 to 4 to preset more stations.

Selecting a preset station

Press the numeric buttons to select the channel.

For channels 10 to 15 press [h10], then the two digits.

OR

1	Press [PLAY MODE] to select “PRESET”.
2	Press [ /4] or [ /¢] to select the channel.

FM allocation setting

By main unit only

This system can also receive FM broadcasts allocated in 0.1 MHz steps.

To change the step to 0.1 MHz

1 Press [TUNER/BAND] to select “FM”.

2 Press and hold [TUNER/BAND].

After a few seconds the display changes to a fl ashing display of the current minimum frequency.

3 Continue to hold down [TUNER/BAND].

•When the minimum frequency changes, release the button. To return to the original step, repeat the above steps.

•After the setting is changed, any previously preset frequency will be cleared.

RQTV0160

9