Before YOU Begin, Electrical Requirements | GE AEE08, AEE12 instruction

Installation Instructions

Air Conditioner

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these

instructions for local inspector’s use.

•IMPORTANT — Observe all governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Approximately 1 hour

•We recommend that two people install this product.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

•You MUST use all supplied parts and use proper installation procedures as described in these instructions when installing this air conditioner.

ELECTRICAL REQUIREMENTS

Some models require a 115/120-volt a.c., 60 Hz grounded outlet protected with a

15-amp time delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt a.c., protected with a time delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

CAUTION:

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems—consult a qualified electrician.

Do not install this air conditioner in a window if the bolts do not contact the window sill. See the Window Installation Instructions in this manual.

TOOLS YOU WILL NEED
Phillips head screwdriver
Adjustable wrench	Flat-blade screwdriver
Pencil	Ruler or tape measure
Level	Scissors or knife

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

AEE12, AEE08 specifications

The GE AEE08 and AEE12 are advanced air conditioning units designed to provide efficient cooling in residential and light commercial environments. These models are part of General Electric's lineup of window air conditioners, specifically engineered to deliver powerful performance and energy efficiency.

One of the standout features of the GE AEE08 and AEE12 is their cooling capacity. The AEE08 model boasts a cooling capacity of 8,000 BTUs, while the AEE12 offers a slightly higher capacity of 12,000 BTUs. This makes them suitable for medium to large-sized rooms, ensuring comfortable living spaces even during the hottest summer days.

Energy efficiency is a critical consideration, and both models are equipped with the latest technologies to reduce power consumption. With an Energy Efficiency Ratio (EER) of 12.1 for the AEE08 and 11.5 for the AEE12, these units are designed to cool effectively while helping to lower electricity bills. Additionally, they often come with Energy Star certification, indicating that they meet or exceed energy efficiency guidelines set by the U.S. Environmental Protection Agency.

The AEE08 and AEE12 are also equipped with innovative features that enhance user convenience and comfort. The units come with multiple cooling and fan speeds, allowing users to customize their experience based on their specific needs. The adjustable thermostat ensures precise temperature control, while the remote control allows for easy operation from across the room.

Another noteworthy characteristic is the quiet operation of these air conditioners. GE has incorporated advanced acoustics design in both models, which minimizes noise levels for a more peaceful environment, making them suitable for bedrooms, living rooms, or offices.

Installation is straightforward, as both the AEE08 and AEE12 come with a window installation kit that simplifies setup. The slide-out filter is easy to clean, ensuring optimal performance over time.

In conclusion, the GE AEE08 and AEE12 air conditioners stand out due to their robust cooling capacities, energy efficiency, and user-friendly features. They serve as excellent choices for anyone looking to enhance indoor comfort during the warm months, marrying technology with practical functionality for an optimal cooling experience.