Samsung AD18B1C09 Deciding on Where to Install the Air Conditioner, Indoor Unit

Page 30

PREPARING THE INSTALLATION

Deciding on Where to Install the Air Conditioner

When deciding on the location of the air conditioner with the owner, the following restrictions must be taken into account.

General

Do NOT install the air conditioner in a location where it will come into contact with the following elements:

◆Combustible gases

◆Saline air

◆Machine oil

◆Sulphide gas

◆Special environmental conditions

If you must install the unit in such conditions, first consult your dealer.

Indoor Unit

◆There must be no obstacles near the air inlet and outlet.

◆Install the indoor unit on a surface that can support its weight.

◆Choose a position that enables the piping and cables to be easily connected to the outdoor unit and the recommended length of 5m (16ft. 5in) to be respected (15m (49ft.3in) maximum).

◆Leave enough clearance beneath the indoor unit to enable the filters to be removed without hindrance.

◆Maintain sufficient clearance around the indoor unit, as indicated in the diagram on the page opposite.

◆Make sure that the water dripping from the drain hose runs away correctly and safely.

Outdoor Unit

◆The outdoor unit must NEVER be placed on its side or upside down, as the compressor lubrication oil will run into the cooling circuit and seriously damage the unit.

◆Choose a location that is dry and sunny, but not exposed to direct sunlight or strong winds.

◆Do not block any passageways or thoroughfares.

◆Choose a location where the noise of the air conditioner when running and the discharged air do not disturb any neighbours.

◆Choose a position that enables the piping and cables to be easily connected to the indoor unit and the recommended length of 5m (16ft. 5in) to be respected (15m (49ft.3in) maximum).

◆Install the outdoor unit on a flat, stable surface that can support its weight and does not generate any unnecessary noise and vibration.

◆Position the outdoor unit so that the air flow is directed towards the outside, as indicated by the arrows on the top of the unit.

◆Maintain sufficient clearance around the outdoor unit, as indicated in the diagram on the page opposite.

◆If the outdoor unit is installed at a height, ensure that its base is firmly fixed in position; the maximum height is 7m (23ft).

◆Make sure that the water dripping from the drain hose runs away correctly and safely.

CAUTION

◆You have just purchased a split-type room air conditioner and it has been installed by your installation specialist.

◆This device must be installed according to the national electrical rules.

◆When the outdoor temperature is below 40°F(4°C), turn the main power off.

E-30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Installation Manual Manual DE Instrucciones Safety Precautions Contents View of the Unit Indoor UnitOutdoor Unit UD18B1C2 Remote Control Buttons and Display Getting Started Inserting the Remote Control Batteries Installing the Remote Controller HolderWay Function Using with the indoor unitSelecting with the Remote Control To obtain anSelecting the Automatic Operating Mode Cooling Your Room Heating Your Room Changing the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Vertically When Adjust the blade to faceAdjusting the Air Flow Direction Horizontally Setting the On Timer To Cancel the On TimerSetting the Off Timer To Cancel the Off TimerSetting the Sleep Timer To Cancel the Sleep TimerOperating Recommendations Topic RecommendationTemperature and Humidity Ranges Mode Outdoor Temperature Indoor Temperature Indoor HumidityIf the air conditioner is used at... Then Cleaning Your Air Conditioner Have switched off the breaker used for the unitSolving Common Problems Installing a Filter Option Technical Specifications ModelMemo Installation Manual Purging the Unit Deciding on Where to Install the Air Conditioner Indoor UnitUnit Piping length and the height26,000Btu/h Air Conditioner and Accessories Accessories in the Indoor Unit CaseAccessories in the Outdoor Unit Case Fixing the Installation Plate Then follow StepsWall Window frame Connecting the Assembly Cable Purging the UnitConduit kit is optionalA and B Installing and Connecting the Indoor Unit Drain Hose Upwards Placed in water DirectionsInstalling and Connecting the Indoor Unit Assembly Piping PipeTorque Cutting/Extending the Piping Depth aConnecting the Cables to the Outdoor Unit UD26B1C2Auxiliary Circuit Breaker Electrical WorkChecking Correct Earthing Installing and Connecting the Outdoor Unit Drain Hose Fixing the Unit in PositionConnecting Up and Purging the Circuit If you have used ThenPerforming Leak Tests Placing the Indoor Unit in Position Checking and Testing Operations Room noOutdoor Unit If the lamp is not flickering, check as followsDisplay Explanation Remark Example English Explaining Operations to the Owner Memo Electronics
Related manuals
Manual 37 pages 43.39 Kb

AD18B1C09 specifications

The Samsung AD18B1C09 is an exceptional air conditioning unit that brings together cutting-edge technology and user-friendly design to create a comfortable environment in your home or office. This model stands out for its efficient performance and robust features tailored to meet various climate control needs.

One of the primary highlights of the AD18B1C09 is its impressive cooling capacity. It is designed to deliver rapid cooling even in large spaces, ensuring that every corner of the room reaches the desired temperature quickly. This makes it an ideal choice for areas that experience high temperatures, providing instant relief during hot summer months.

Energy efficiency is another hallmark of the AD18B1C09. With a high Energy Efficiency Ratio (EER), this air conditioner helps users save on electricity bills while minimizing their carbon footprint. The unit is equipped with advanced inverter technology, which adjusts the compressor speed based on the cooling demand. This not only enhances efficiency but also ensures quieter operation compared to traditional air conditioning systems.

The Samsung AD18B1C09 comes with a range of user-friendly features that enhance convenience. Its remote control functionality allows users to operate the unit from a distance, adjusting settings such as temperature, fan speed, and mode with ease. Additionally, smart features like programmable timers and sleep modes optimize energy use and enhance comfort without constant oversight.

Moreover, the unit is designed with a multi-stage filtration system that improves indoor air quality. This system effectively removes dust, allergens, and other impurities from the air, making it a great choice for individuals with allergies or respiratory concerns. The filters are easily accessible for maintenance, ensuring that the air quality remains consistently high.

In terms of design, the Samsung AD18B1C09 features a sleek and modern aesthetic that blends seamlessly with any interior decor. Its compact dimensions allow for versatile installation options, whether mounted on walls or placed in window units, providing flexibility to meet different spatial requirements.

Overall, the Samsung AD18B1C09 air conditioner combines powerful cooling capabilities, exceptional energy efficiency, and user-centric design, making it a top choice for those seeking reliable climate control solutions. This model truly embodies Samsung's commitment to innovation and quality in the realm of home appliances.
Top Page Image Contents