Setting the On Timer
The On Timer enables you to turn on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours.
1 Press | button. |
Result: | is blinking on the remote control display. |
2 Press
button to set until the desired time is displayed.
Result: Time is adjusted for 30 minutes or 
button within a range of 30 minutes to 24 hours.
3Press 
button to complete setting.
Result: Blinking 
stops and remaining time is displayed.
If you don’t press 
button in 10 seconds, setting will be canceled.
To cancel the set, press 
again.
4 Press 
button until the desired mode appears on the remote control display.
Result: The air conditioner runs in the selected mode when it is turned on.
Whenever pressing 
button, Auto Cool Dry Fan Heat is selected repeatedly.
5 To adjust the temperature, press | button to set the desired tem- |
perature. |
|
Result: Press 
button until the desired temperature appears on the remote control display.
Adjusting temperature is in Auto, Cool, Dry and Heat mode.