Samsung SU9380, DJ68-00264B user manual Cleaning Brushbar

Page 16

Maintain tools and filter

Carton contents

Brushbar Replacement

1. Remove the tool from the pipe, and turn upside down.

Slide the switch to unlock position and remove bottom plate.

2.Remove brushbar and discard.

3.Inspect belt to ensure that it is in good

condition. If broken or cracked, please replace. (See below for details.)

4. With the curved ends facing down, slide end plates of brushbar into slots on the tool.

5. To replace bottom plate, insert the four tabs on edge of bottom plate into slots on front of tool. Pivot bottom plate down and snap closed.

Belt Replacement

1. Grasp turbine and pull firmly to remove.

2. Remove belt from turbine pulley. Replace with new belt.

3. With flat sides of turbine retainers pointing down, slide retainers into grooves in tool housing and snap into place.

4. Replace brushbar and bottom plate.

Cleaning Brushbar

Cut off pet hairs or threads surrounding brush by using scissors.

16_ Maintain tools and filter

Image 16
Contents Product accessories Assembling the cleanerCarton contents Safety information Safety InformationIMpORTANT Safety INSTRucTIONS Contents HlEANERTg INTROducTIONASSEMblIN Accessories Assembling the cleaner TOOl STORAgE Operating the cleaner POwER Foot hEIghT AdjuSTMENTCORd RElEASE HlEANERTg OpERATINPower switch/Power foot brush roll switch Circuit breaker Reset switchHow to operate Plug cord into electrical outlet. Press power on/off buttonHandle Positions TOw h 03OpERATEUSINg AccESSORIES Cleaning toolsLongreach cleaning Unplug cleaner from electrical outlet Maintain tools and filterCheck Rotating Floor Brush and Drive Belt Replace Drive BeltSmart Inverter Maintain TOOlS ANd FIlTERCleaning Brushbar EMpTYINg ThE duST bIN Cleaning the dust bin & Re-assembling the dust bin WAShINg YOuR FIlTER FIlTERTrouble shooting Vacuum cleaner won’t turn onVacuum cleaner won’t Pick up / Loss of suction Dust escaping from the vacuum cleaner