Please Read Save These Important Safety Instructions

PLEASE READ AND SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety pre- cautions should always be taken including the fol- lowing:

•Use fan only for purposes described in the instruction manual.

•To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids.

•Close supervision is necessary when any appli- ance is used by or near children.

•Unplug from outlet when not in use, when mov- ing fan from one location to another, before put ting on or taking off parts, and before cleaning.

•Avoid contact with moving parts.

•Do not operate in the presence of explosive and or flammable fumes.

•Do not place fan or any parts near an open flame, cooking or other heating appliance.

•Do not operate any appliance with a damaged cord, plug, after the appliance malfunctions, or has been dropped / damaged in any manner.

•The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.

•Do not use outdoors.

•Do not let the cord hang over the edge of a table, counter or come in contact with hot sur- faces.

•To disconnect, grip plug and pull from wall out let. Never yank on cord.

•Always use on a dry, level surface.

•Do not operate without fan grills properly in place.

•This product is intended for household use ONLY and not for commercial or industrial applications.

WARNING: To reduce the risk of fire or electrical shock, DO NOT USE THIS FAN, with any SOLID STATE Fan Speed Control Device.

PLEASE READ AND

SAVE THESE

IMPORTANT SAFETY

INSTRUCTIONS

THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC

(Alternating Current)PLUG (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. DO NOT DEFEAT THE SAFETY PUR-

POSE OF THIS POLARIZED PLUG IN ANY WAY.

ASSEMBLY INSTRUCTIONS

Base / Pole Assembly

Step 1: Slide the bottom end of the outer pole through the pole ring.

Step 2: Turn the base cover upside down and place the weighted insert and washer into the base cover.

Step 3: Insert the threaded end of the L shaped locking lever into the hole of the washer, weighted insert and through the base cover.

Step 4: While holding the base and weighted insert together, connect the pole to the base, sliding the washer and L shaped locking lever into the bot- tom of the outer pole.

Step 5: Turn the L shaped locking lever clockwise to

securely attach the pole to the base.

Step 6: Set the base on the floor, weight side down. Push the pole ring down until it sits directly on the base.

Fan Head Assembly

Step 1: Position the rear grill over the motor shaft, mak- ing certain the notches at the top and bottom of the rear grill fit over the prongs on the motor housing. Please make sure the rear grill fits securely against the motor housing.

Step 2: Secure the rear grill in its place using the rear grill mounting-ring. Turn this ring clockwise and tighten firmly.

Step 3: Slide the fan blade, with the hollowed interior of the blade facing toward the rear grill, firmly onto the motor shaft. The top of the motor shaft should lie even with the center of the fan blade.

106573 specifications

General Electric (GE) has long been a pioneer in various industries, and the model GE 106573 is no exception. This device stands out due to its remarkable blend of advanced features, technologies, and characteristics that cater to both industrial and commercial applications.

One of the primary features of the GE 106573 is its robust construction, designed to endure the rigors of demanding environments. This durability ensures prolonged operation, which is critical for businesses that rely on consistent performance. The model also boasts an impressive energy efficiency rating, which not only helps reduce operational costs but also aligns with global sustainability efforts.

The GE 106573 incorporates state-of-the-art digital technologies that enhance user experience and optimization. The device includes an integrated control system that allows for real-time monitoring and adjustments. This capability enables users to track performance metrics, diagnose issues promptly, and implement corrective actions before they escalate into serious problems.

In terms of connectivity, the GE 106573 is equipped with modern communication protocols, allowing for seamless integration into existing networks. This feature is essential for industries that are increasingly leaning towards automation and IoT (Internet of Things) applications. The connectivity options ensure that data can be collected and analyzed efficiently, leading to improved operational decision-making.

Another notable characteristic of the GE 106573 is its versatility. The device can be customized to meet the specific needs of various industries, from manufacturing to energy production. This adaptability is crucial in today’s rapidly changing market landscape, where businesses must remain agile to stay competitive.

Safety features in the GE 106573 are also paramount. The model includes multiple layers of safety measures, such as overload protection and emergency shutdown mechanisms, ensuring the safety of personnel and equipment during operation. This commitment to safety reinforces GE’s reputation as a trusted provider of industrial solutions.

In summary, the GE 106573 is a remarkable model that combines durability, energy efficiency, advanced digital technologies, connectivity, versatility, and safety features. Its design reflects General Electric's commitment to innovation and excellence, making it a preferred choice across various industries. Businesses investing in the GE 106573 can expect to benefit from its extensive capabilities, helping them achieve operational efficiency and drive growth in an increasingly competitive landscape.