Using Motion Sensor Wall Switch, Adjustments

ADJUSTMENTS

Time

The length of time that the lights stay on is adjustable from 5 seconds to 20 minutes. Use a small Phillips screw driver to adjust the TIME control (see Figure 4). Turn control clockwise to increase the time and counterclockwise to de- crease the time.

Light Level

You can adjust the sensorÕs sensitivity to existing light. Use a small Phillips screw driver to adjust the LIGHT control (see Figure 4). By turning the control fully clockwise, the sensor will turn lights on even in full daylight. By turning the control fully counterclockwise, the sensor will only turn lights on when the existing light is very low.

Adjusting the Photocell

1.When the existing light in the room is at the level you want the lights to turn on, set the mode selection switch to the AUTO position.

2.Adjust the TIME control to the 5 second position (fully counterclockwise).

3.Adjust the LIGHT control to the minimum dark position (fully counterclockwise).

4.Wait for the lights to turn off.

5.Slightly turn the LIGHT control clockwise. Wait 2 seconds, then move your hand in front of the sensor. If lights controlled by the sensor do not come on, repeat this step until they do. The light will now come on when the light level is at or below the present level and motion is detected.

	Any Light	Dark (low
20 min. 5 Sec.	Level	light level)
+	+
T I M E	L I G H T

Figure 4 - Time and Light Adjustments

COMPLETING INSTALLATION

1.Replace control panel cover and attach the decorative wall plate. In installations where the Heath¨/Zenith motion sensor switch is combined with other switches or outlets on an expanded box, you will need to purchase a combination wall plate. Various combina- tion wall plates are available at home centers and electrical supply stores.

2.Slide the mode selection switch a couple times to make sure it moves freely.

USING MOTION SENSOR

WALL SWITCH

MODE SELECTION SWITCH

This switch allows you to selects one of three modes of operation: OFF, AUTO, or ON. OFF: Lights stay off.

AUTO: Lights automatically come on when mo- tion is detected and the existing light is below the set level.

ON: Lights stay on continuously.

	SPECIFICATIONS
Electrical Input	120V, 60 Hz.
Fluorescent Load	30 Watts minimum, Up to 400 Watts Maximum Rapid Start
Motor Load	Up to 1/8 HP Maximum
Incandescent	Up to 500 Watts Maximum at 120VAC
On-Time	Adjustable approximately 5 sec. to 20 min.
Photocell Sensor	From full daylight to less than 1 FC.
Coverage	up to 15 ft. (4.6 m) at 150°, up to 30 ft. (9.1 m) in front of the sensor

DESA Specialty Productsª reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

595-4881-09

SL-6105 specifications

The Heath Zenith SL-6105 is a modern and efficient outdoor motion-activated light that combines functionality with advanced technology. This outdoor lighting solution is designed to provide safety, security, and convenience, making it an ideal choice for homeowners who want to enhance their property's visibility and deter potential intruders.

One of the main features of the SL-6105 is its powerful 180-degree motion detection capability, which ensures that a wide area is monitored. This means that when movement is detected, the light will automatically turn on, providing bright illumination as needed. The sensor has an impressive range, with the ability to detect motion from up to 30 feet away. This feature ensures that you are alerted to any activities around your home, increasing safety and peace of mind.

The SL-6105 also boasts adjustable sensitivity and time settings. Homeowners can customize the motion detection sensitivity to avoid false triggers from pets or passing cars. Additionally, the duration of the light can be set anywhere from 1 minute to 10 minutes, allowing for flexibility based on individual preferences and security needs.

In terms of design, the SL-6105 features a sleek and modern aesthetic, making it a suitable addition to various exterior styles. The fixture is also built to withstand harsh weather conditions, with a durable construction that resists corrosion and fading. This resilience ensures that the light maintains its functionality and appearance for years to come.

The Heath Zenith SL-6105 utilizes energy-efficient LED technology, which not only provides bright illumination but also contributes to lower energy costs. LEDs are known for their longevity and minimal heat output, making them an environmentally friendly choice compared to traditional incandescent bulbs.

Installation of the SL-6105 is straightforward, with clear instructions that make setup easy for users with basic DIY skills. The light can be mounted on walls or under eaves, providing flexibility in terms of placement to maximize coverage.

Overall, the Heath Zenith SL-6105 is a versatile and practical solution for outdoor lighting needs. With its advanced motion detection, customizable settings, durable construction, and energy-efficient lighting, it stands out as a reliable choice for enhancing outdoor safety and visibility. Whether illuminating a driveway, porch, or backyard, the SL-6105 offers a perfect blend of technology and design.