Panasonic CQ-C1001W Display change, Manual station preset, Power On/Off, Source Selection, Mute

General

Radio (FM/AM)

Audio Settings

	CQ-C1121W	CQ-C1101W		[D•M] (Direct Memory)
[VOL] (Volume) (Turn)				tunes into the station memorized in D•M.
				(Hold it down for more than 2 seconds to
			Remote Control Sensor	memorize the current station.)
	CQ-C1001W
[VOLUME▲] [VOLUME▼] (Press)			(only for CQ-C1121W)

adjusts the volume.

[BAND]

selects a band in the radio source.

(APM) (Auto Preset Memory)

executes APM in the radio source. (Hold it down for more than 2 seconds.)

[D•M] (Direct Memory)

tunes into the station memorized in D•M.

(Hold it down for more than 2 seconds to

memorize the current station.)

Display

lights while receiving an FM stereo signal.			Display change
	Frequency	Band Preset Number
			Press [DISP] to change the display.

Radio source display (Default)

CQ-C1121W CQ-C1101W

[VOL]		VOL
selects a value in the audio menu.	BAND						CQ-C1121W
											D M
									C	K	·
		P
(PUSH SEL) (Push to Select)	APM	U							A
		S							E
									R
		H							T
									/
		S							N
selects items in the audio menu.		E							U
	PWR	L							T		CLOCK
		MUTE								A	R EP
			7	8	9	10	11	12	R
	SRC								SQ/SCAN	N	DISP
										D
										O
			1	2	3	4	5	6		M
CQ-C1001W

VO

BAND

L

CQ-C1121W

BAND

·

P

C

K

D M

V

O

APM

U

A

APM

L

S

R

H

T

U

/

SEL

M

S

N

E

U

PWR

E

PWR

L

T

CLOCK

MUTE

7

8

9

10

11

12 SQ/SCAN

R

R EP

MUTE

SRC

A

SRC

N

DISP

D

O

1

2

3

4

5

6

M

lights when mute is on.

BAND

APM

PWR

SRC

VOL				CQ-C1121W
								·
P						C	K	D M
U						A
S						R
H						T
						/
S						E
						N
E						U			CLOCK
L						T
MUTE 7						R		R EP		[DISP] (Display)
	8	9	10	11	12	SQ/SCAN	A		DISP
							N
							D
1	2	3	4	5	6		O
							M
										switches the information on
										the display.

Radio Source

Clock display

lights while receiving the D•M station.

[▲] or [▼]	BAND
			V
selects a value in the audio menu.	APM		O
		SEL	L
			M
			U
[SEL] (Select)	PWR		E
	SRC		MUTE
selects items in the audio menu.

1Display the audio menu.

CQ-C1121W CQ-C1101W

Press [VOL] (PUSH SEL).

[DISP] (Display)

exits from the audio menu.

Note: If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjustment), the display returns to the regular mode.

[SRC] (Source)	[MUTE]	[SQ] (Sound Quality)
selects a source.	toggles mute on/off.	selects a sound type (SQ).
(PWR) (Power)
toggles power on/off.

[SRC] (Source)	Preset buttons [1] to [6]	[TUNE ]] [TUNE []
selects a source.	selects a preset station in the radio source,	down/up the frequency. (Hold it down for
	and presets the current station. (Hold it down	more than 2 seconds for seek tuning.)
	for more than 2 seconds.)

Up to 6 stations can be preset in AM, FM1, FM2, and FM3	Manual station preset
respectively.

CQ-C1001W

Press [SEL].

2Select a mode to be adjusted.

3 Adjust.

Operations

Power On/Off

Turn your car's ignition switch to the ACC or ON position.

Power on: Press [SRC] (PWR).

Power off: Hold down [SRC] (PWR) for more than 1 second.

Source Selection

Press [SRC] to change the source.

Radio Disc Player

Volume Adjustment

(Setting Range: 0 to 40, Default: 18)

SQ (Sound Quality)

SQ is a function that can call up various sound types at the touch of button in accordance with your listening music type.

Press [SQ] to select the sound type as follows:

(FLAT) flat frequency response:

does not emphasize any part. (Default)

(ROCK) speedy and heavy sound: exaggerates bass and treble.

(POP) wide-ranged and deep sound: slightly emphasizes bass and treble.

(VOCAL) clear sound:

emphasizes middle tone and slightly empha-

1 Press [SRC] to select the radio source.	3 Select a station.
2 Press [BAND] to select a band.
		Frequency adjustment
		[TUNE]]: Lower
		[TUNE[]: Higher
		Note: Hold down either of them for more than 0.5
Flow		seconds and release it for station search.

Station Preset

Preset stations can be simply called up by pressing one of the preset buttons from [1] to [6].

Auto Preset Memory (APM)

With this operation, stations with good receiving conditions can be automatically stored in the preset memory.

1Select a band.

2 Hold down [BAND] (APM) for more than 2 seconds.

The preset stations under best receiving conditions are received for 5 seconds each after presetting the stations (SCAN). To stop scanning, press one of the preset but- tons from [1] to [6].

Note: New stations overwrite existing saved stations.

1Tune into a station.

2Hold down one of the preset buttons from [1] to [6] for more than 2 seconds.

(blinks once.)

Note: New stations overwrite existing saved stations.

CQ-C1121W CQ-C1101W

Press [VOL] (PUSH SEL).

CQ-C1001W

Press [SEL].

	Volume
menu	(Setting Range: 0 to 40, Default: 18)
	Bass
Audio	(Setting Range: –12 dB to +12 dB by 2 dB,
	Default: 0 dB)
	Treble
	(Setting Range: –12 dB to +12 dB by 2 dB,
	Default: 0 dB)

CQ-C1121W CQ-C1101W

Turn [VOL].	[▲]
	[▼]
CQ-C1001W

Press [▲] or [▼].

[▲]: Up

[▼]: Down

[▲]: Increased

[▼]: Decreased

[▲]: Increased

[▼]: Decreased

General

CQ-C1121W CQ-C1101W

Turn [VOL].

CQ-C1001W

Press [VOLUME▲] or [VOLUME▼].

Mute

ON: Press [MUTE]. ( lights.)

OFF: Press [MUTE] again.

sizes treble.

Note: Settings of SQ, bass and treble are influenced one another. If such an influence causes distortion to the audio signal, readjust bass/treble or volume.

Operation	Preset station selection
	Press the corresponding preset button from [1] to [6] to
	tune in a preset station.

Direct Memory

You can assign your favorite broadcasting station to the	D•M station writing
[D•M] (Direct Memory) button. As the result of doing that,
	1 Select a station you would like to preset.
your favorite broadcasting station can be received even if the
unit is turned off, or the CD mode is activated.
	2 Hold down [D•M] for more than 2 seconds.
D•M station calling
1 Press [D•M].
Press again to cancel.

Balance

(Setting Range: 15 levels each and 0 (center),

Default 0)

Fader

(Setting Range: 15 levels each and 0 (center),

Default 0)

Note: If the fader is set to front, the pre-amp. output (rear) is decreased.

[▲]: Right enhanced

[▼]: Left enhanced

[▲]: Front enhanced

[▼]: Rear enhanced

Remote Control Unit (only for CQ-C1121W)

Note: This operating instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)

Disc Player

Disc slot [TRACK s] [TRACK d]

Random indicator Display change

Troubleshooting

If You Suspect Something Wrong

[PWR] (POWER) toggles power on/off.

	POWER
	PWR	MUTE
		VOL
[MODE]	MODE

[MUTE]

toggles mute on/off.

[VOL}] [VOL{]

adjust the volume.

takes a disc in with the label-side facing up.	skip to the previous/next track in the player
Note: The power will be turned on automatically	mode.
when a disc is loaded.	Hold down either of them for fast reverse/fast
	forward.

Play time Track number Press [DISP] to change the display.

Player source display (Default)

lights when a disc is in the player.

Check and take steps as described below.	Warning
If the described suggestions do not solve the problem, it is recom-	¡Do not use the unit in an irregular condition, for example, with-
mended to take the unit to your nearest authorized Panasonic Service	out sound, or with smoke or a foul smell, which can cause
Center. The product should be serviced only by qualified personnel.	ignition or electric shock. Immediately stop using the unit and
Please refer the checking and the repair to professionals. Panasonic	consult your dealer.
shall not be liable for any accidents arising out of neglect of checking	¡Never try to repair the unit by yourself because it is dangerous
the unit or your own repair after your checking.	to do so.

selects a mode. (source)

TUNE

(y / 5) (Pause/Play)

toggles pause/play in the play- er source.

BAND

APM

PWR

[u] (Eject) ejects the disc.

VOL	CQ-C1121W
			·
P	C	K	D M
U	A
S	R
H	T
	/
S	E
	N
E	U		CLOCK
L	T

Repeat indicator

Clock display

Trouble Check point Trouble Check point

	TRACK
[BAND]	BAND

[TUNE]] [TUNE[]

SRC

MUTE 7	8	9	10	11	12 SQ/SCAN	R	R EP	[DISP] (Display)
						A
						N	DISP
						D
						O
1	2	3	4	5	6	M		switches the information on

Common

● Start the engine. (Or turn the ignition

CD Player

No sound, or disc

selects a band in the radio source,
toggles pause/play in the player source,
and executes APM in the radio source.
(Hold it down for more than 2 seconds.)	CAR AUDIO

down/up the frequency. (Hold it down for more than 2 seconds for seek tuning.)

[TRACK s] [TRACK d]

skip to the previous/next track in the player mode.

Hold it down for fast reverse/fast forward.

[SRC] (Source) selects a source.

			the display.
[1] to [6]
		[REP] (Repeat)
(7) to (12) (Hold down one of them for		toggles on/off the repeat play.
more than 2 seconds.)		(RANDOM)
select a track directly.		toggles on/off the random play. (Hold it down
	(SCAN)	for more than 2 seconds.)

Random play

All the available tracks are played in a random sequence.

Hold down [REP] (RANDOM) for more than 2 seconds.

Hold down again to cancel.

Scan play

The first 10 seconds of each track is played in sequence.

Hold down [SQ] (SCAN) for more than 2 seconds.

No power

switch to the ACC position.)

● Verify the wiring. (Ex. battery lead,

power lead, ground lead, etc.)

● Fuse blown (Contact the nearest

Panasonic Service Center.)

● Ask a professional for fuse replacement.

● Be sure to use the same rated fuse.

is automatically

ejected

Sound skip, poor sound quality

● Load the disc correctly.

● Clean the disc.

● Clean the disc.

toggles on/off the scan play. (Hold it down for more than 2 seconds.)

Repeat play

(blinks during scanning.)

● Disable the mute function.

● Verify the wiring.

Sound skip

due to

vibration

● The maximum permissible tilt angle is

30°.

● Secure the unit.

Battery Replacement

Warning

¡Keep batteries away from children to avoid the risk of

Caution

¡Do not insert a disc when the	indicator lights.
¡Refer to the section of “Notes on Discs”.

Player Source Display

Random, Repeat, Scan

The current track is repeated.

Press [REP].

Hold down again to cancel.

No sound

● Wait until the dew disappears before

turning on the unit.

Disc not

● Press [u]. If the disc is still not eject-

ed, contact the nearest Panasonic

q Remove the battery holder with the remote control unit placed on a flat surface.

q Stick your thumbnail into the groove, and push the holder in the direction of

Tough pointed object

accidents. If an infant ingests a battery, please seek immediate medical attention.

Caution

¡Remove and dispose of the old battery immediately.

¡Do not disassemble, heat or short a battery. Do not

¡This unit does not support 8 cm discs.

¡If you insert an 8 cm disc and cannot eject it, turn ACC of your car off once and turn it on again, then press [u] (Eject).

¡This unit does not support MP3 and WMA disc playback.

¡This unit does not support CD text display.

¡Do not insert foreign matter into the disc slot.

Press again to cancel.

Noise	●Make sure that grounding is established
	properly.
No sound from	● Adjust the balance and fader.
left, right, front,
	● Verify the wiring.
or rear speaker

ejectable

Service Center.

Error Display Messages

Battery Notes

the arrow at the same time.

w Pull it out in the direction of the arrow using a tough pointed object.

w Put a battery in the case with (+)-side facing up.

e Put the case back.

w q

Back side

2

3

throw a battery into a fire or water.

¡Follow local regulations when disposing of a battery.

¡Improper use of batteries may cause overheating, an

explosion or ignition, resulting in injury or a fire.

Note: Battery Information:

Battery Type: Panasonic lithium battery (CR2025) (Included in the remote control)

Battery Life: Approximately 6 months under normal use (at room temperature)

Operation Flow

1Press [SRC] to select the Disc Player source.

2Select a desired portion.

Track selection

Press [TRACK s] / [TRACK d].

Note: To perform fast forward/reverse, hold down either of them.

Pause

Press [BAND] (y / 5).

Press again to cancel.

Direct track selection

Press a track number button from [1] to [6].

¡The corresponding track (1–6) starts playing.

Hold down a track number button from [1] to [6] ((7) to (12)) for more than 2 seconds.

¡The corresponding track (7–12) starts playing.

Notes on discs

Notes on CD/CD Media

If you use commercial CDs, they must have the label shown at right.

Some copy-protected music CDs are not playable.

How to hold a disc

¡Do not touch the underside of a disc.

¡Do not scratch on a disc.

¡Do not bend a disc.

¡When not in use, keep a disc in a case.

Do not use irregularly shaped discs.

Do not leave discs in the following places:

¡In direct sunlight

¡Near car heaters

¡Dirty, dusty and damp areas

¡Seats and dashboards

Disc cleaning

Use a dry, soft cloth to wipe from the center outward.

Do not attach any seals or labels to your discs. Do not write on the disc label with a ballpoint pen or other hard-point pens.

Notes on CD-Rs/RWs

¡You may have trouble playing back some CD-R/RW discs recorded using CD recorders (CD-R/RW drives), either due to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.

¡CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them inside a car for extended periods may damage and make playback impossible.

¡Some CD-R/RWs cannot be played back successfully due to incompatibility among writing software, a CD recorder (CD-R/RW drive) and the discs.

¡This player cannot play the CD-R/RW discs if the session is not closed.

¡This player cannot play the CD-R/RW discs which contain other than CD-DA data (MP3/WMA, Video CD, etc.).

¡Be sure to observe the instructions of the CD-R/RW disc for handling it.

Left and right
sounds are	● Connect the speaker lead correctly.
reversed

Radio

Frequent	● Tune in to another station of high-inten-
	sity waves.
noise	● Make sure that the antenna mounted
	point is grounded properly.
Preset data	● The preset memory is cleared to return
	to the original factory setting when the
deleted	power connector or battery is discon-
	nected.

(The disc is ejected automatically.) The disc is dirty, or is upside down. The disc has scratches.

● Check the disc.

No operation by some cause.

●If normal operation is not restored, call

the store where you purchased the unit or the nearest Service Center to ask for repairs.