Parts List, AFTER-USE Safety | Brinkmann 882-0650-0 specification

PARTS LIST

INSPECT CONTENTS TO ENSURE ALL PARTS

ARE INCLUDED AND UNDAMAGED.

INSTALLATION AND OPERATING

INSTRUCTIONS

ASSEMBLING YOUR COPPER TORCHLIGHT

Step 1

The stake has been pre-drilled with a hole for the snuffer hook that is used for the snuffer cap when not in use. Place snuffer hook into hole and screw tightly into stake clockwise.

Step 2

Using rubber mallet, drive stake into firm, level ground 10 to 12 inches.

NOTE: Ground can be softened with water, however, stake must be stable prior to lighting torchlight.

WARNING

•Install stake into firm, level, soil/ground a minimum of 10 to 12 inches. Make sure stake is stable in ground before operating torchlight.

•Torchlights are only to be installed a minimum of 8 feet from building walls or overhang.

Step 3

Place copper torchlight securely on top of ground stake.

FILLING YOUR COPPER TORCHLIGHT

Step 1

Remove torchlight from ground stake.

Step 2

Remove brass cap and wick assembly from torchlight by turning counter-clockwise. Fill torchlight with lamp oil 3/4 to the top. ONLY USE LAMP OIL. DO NOT OVERFILL.

WARNING

•DO NOT use gasoline, kerosene, alcohol, or other flammable fuel in or around this torchlight.

Step 3

Reinsert wick assembly into torchlight and screw top cap back onto the torchlight. Use caution to avoid spilling oil. Before lighting, clean excess oil that may have spilled over onto torchlight or surface below torchlight.

LIGHTING YOUR COPPER TORCHLIGHT

WARNING

•DO NOT operate this torchlight until you have read and understand all of the warnings and instructions in this manual.

•Keep children, pets, loose clothing and hair safely away from torchlight. Failure to adhere to this could lead to severe personal injury.

Step 1

Extend wick to no more than 1/2" above top cap.

Step 2

Allow 15 minutes for wick to become completely saturated with oil before lighting. Use long match/long nose lighter to light wick.

AFTER-USE SAFETY

EXTINGUISHING YOUR COPPER TORCHLIGHT

WARNING

•The metal surface can get VERY HOT and caution must be used when handling torchlight after use. Never move torchlight when in use or immediately after use when torchlight and oil may be hot.

•Always place snuffer cap over flame and wick and leave in place until flame has completely extinguished before leaving unattended.

•Allow torch to completely cool before handling.

•Empty remaining oil in torchlight prior to storage. Store oil in its original or a properly sealed container away from any heat source.Empty remaining oil in torchlight prior to storage. Store oil in its original or a properly sealed container away from any heat source.

PROPER CARE & MAINTENANCE

•Allow torchlight to cool, then clean outside by wiping with a damp cloth to minimize accumulation of smoke residue.

882-0650-0 specifications

The Brinkmann 882-0650-0 is a highly regarded outdoor cooking appliance that combines advanced technology with user-friendly design to create an exceptional grilling experience. Known for its reliability and versatility, this grill is perfect for both novice cooks and seasoned grilling enthusiasts alike.

One of the standout features of the Brinkmann 882-0650-0 is its powerful heating capabilities. Equipped with a high-performance burner system, it provides even heat distribution across the cooking surface. This ensures that every part of your food is grilled to perfection, whether you're searing steaks or roasting vegetables. The grill’s total cooking area spans over 500 square inches, allowing users to prepare meals for family gatherings or parties without the need for additional cooking equipment.

Durability is another hallmark of the Brinkmann 882-0650-0. Constructed with high-quality materials, including a robust steel frame and a porcelain-coated cooking surface, this grill is built to withstand the rigors of outdoor cooking. The corrosion-resistant finish not only adds to its aesthetic appeal but also extends the lifespan of the appliance, making it a wise investment for long-term use.

The Brinkmann 882-0650-0 also features an integrated ignition system, which simplifies the start-up process. The push-button ignition allows for hassle-free lighting, eliminating the need for matches or lighter fluid. Additionally, the model is designed with adjustable temperature controls, enabling users to fine-tune the heat settings for optimal cooking results.

For added convenience, the grill includes side shelves which provide ample workspace for food preparation and storage of cooking tools. The integrated thermometer built into the lid allows for easy monitoring of the internal cooking temperature, ensuring that meat and other grilled items are cooked safely and to the desired level of doneness.

Furthermore, the Brinkmann 882-0650-0 is compatible with both propane and natural gas, giving users the flexibility to choose their preferred heat source. This versatility adds to its appeal, making it suitable for a wide range of outdoor settings.

In conclusion, the Brinkmann 882-0650-0 is a well-rounded outdoor grill that boasts powerful performance, durability, and user-friendly features. Whether hosting a weekend barbecue or enjoying a quiet evening meal, this grill is designed to elevate your outdoor cooking experience while delivering exceptional results.