Black & Decker BWE25A, BWE15A, BWE18A Return chassis to the outer case, Fire, or electrical shock

2, Place the window lock bracket as shown. Use a 1/s"drill bit to drill a starter hole through the hole in the window lock bracket and into the upper window.

3, Attach the window lock bracket to the upper window with one 3142"screw to secure the window in place.

4.Plug into a grounded 3 prong outlet.

5.Press RESET on the power supply cord. See "Electrical Requirements."

Return chassis to the outer case

Find someone to help you replace the chassis in outer case. Replace front panel and grille.

i

ij .,,

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Press RESET on the power supply cord. See "Electrical Requirements."

IF AC IS BLOCKED BY STORM WINDOW

•Add wood as shown in FIG.6,or remove storm window before air conditioner is installed.

•If storm window frame must remain,be sure the drain holes or slots are not caulked or painted shut. Accumulated rain water or condensation must be allowed to drain out.

			Sash
			1-1/2"MIN	Board	thickness
				as required,for
Storm	window		(38mm)
frame	or	other		proper	pitch to
obstruction			_--	_{ rear,along		entire
		- yj		sill,fasten		with
				nails or screws.

iMPORTANT: Because the window sash helps keep the unit in win- dow, make certain the window sash contacts the outer case before reinstalling the chassis.