APC ACPSC3000 manual Maintenance, Clean the exterior, Clean the air filter, Replace the air filter

Page 25

Maintenance

Electrical Hazard: Before performing maintenance on the cooling unit:

1.Turn the cooling unit off.

2.Unplug the cooling unit.

Warning: Damage to equipment may occur if:

1.Caustic substances are used to clean the cooling unit.

2.The unit is subjected to excess water.

2. Air filters are cleaned too aggressively or allowed to dry in direct sunlight.

Clean the exterior

Wipe dirt and dust from the exterior surfaces with a soft, dry cloth. Dampen a cloth with a solution of warm water and mild detergent for heavily soiled areas.

Ensure all detergent is wiped from the surface with a clean, damp cloth to remove residue.

Clean the air filter

Check the air filter frequently after initially putting the cooling unit into service. Determine how long between cleanings you can wait. Keeping your air filter clean will maximize the performance and life of the cooling unit.

1.Remove the air filter. Press down on the two tabs on the top of the grill to release the filter and grill from the cooling unit.

–Carefully pull the air filter from the plastic hooks on the inside of the grill.

2.Clean the air filter. About every two to three weeks clean by gently vacuuming, wiping the filter with a dry cloth, or knocking the filter on a firm surface to dislodge dust. Do not use water to clean the filter.

Replace the air filter

See “Remove the air filter” (above) for instructions to properly remove the air filter.

1.Install a new, clean filter by pressing the filter onto the hooks on the grill.

2.Attach the grill to the rear of the cooling unit. Set the bottom of the grill into the opening. Tabs on the grill bottom should enter the slots in the bottom of the opening.

3.Tip the top of the grill up and into the opening. The tabs on the top of the grill should snap into place.

na3369a

InRoom SC 50 Hz User Guide

19

Page 24 Page 26
Image 25
Page 24 Page 26
Contents User Guide Page American Power Conversion Legal Disclaimer Page Contents Troubleshooting Spare Parts List Specifications General Information Performance SpecificationsOverview About the InRoom SC Portable Cooling UnitCross-reference symbol used in this manual Safety symbols that may be used in this manualSafety Cooling Unit Packaging Storing the Cooling UnitFiling a claim Inspecting the Cooling UnitInventory Tools RequiredACPSC3000 Component IdentificationLocation InstallationRequirements Exhaust kit Exhaust Duct AssemblyNa3416a Na3423a Na3424a Continuous draining Drain Kit InstallationControl Panel OperationFunction Button Locations Display Screen Information Display InterfaceFunction Button and Indicator Light Operation Function buttons Remote ControlSet Timer changing settings With the cooling unit on Battery Care Clean the exterior MaintenanceClean the air filter Replace the air filterStoring while not in use Empty the condensate drain panCaster replacement Problem Solution TroubleshootingPart Number Description Spare Parts ListAPCSC3000 SpecificationsPage 990-4223B-001 2010 APC Worldwide Customer Support

ACPSC3000 specifications

The APC ACPSC3000 is a high-performance power conditioning solution designed to provide reliable and efficient power distribution for critical electronic equipment. Engineered by APC, a trusted name in power protection, the ACPSC3000 offers a range of features that cater to the needs of data centers, telecommunications, and industrial environments.

One of the main features of the ACPSC3000 is its ability to deliver superior power management through its advanced power conditioning technology. The unit utilizes a multi-stage filtering mechanism to eliminate electrical noise and surges, ensuring that connected devices receive a clean and stable power supply. This is particularly vital in environments where equipment performance can be disrupted by voltage fluctuations or electromagnetic interference.

The ACPSC3000 also boasts an impressive power capacity, with the ability to handle a significant load. This makes it suitable for powering multiple high-demand devices simultaneously, without compromising performance. Its robust design supports scalability, allowing it to grow with the increasing power needs of modern technology infrastructures.

In terms of connectivity, the APC ACPSC3000 comes equipped with multiple output options, making it versatile for various deployment scenarios. The intelligent LCD display provides real-time monitoring of power metrics, such as load level and input voltage, facilitating quick assessments of system health. Additionally, it features network management capabilities that enable remote monitoring and management, giving users peace of mind from anywhere.

Another characteristic that sets the ACPSC3000 apart is its energy-efficient operation. It incorporates technologies that reduce energy consumption, helping organizations minimize overhead costs while promoting sustainable practices. The unit complies with environmental standards, ensuring minimal impact on energy resources.

Safety features are also paramount in the design of the ACPSC3000. It is equipped with overload protection and short-circuit protection, safeguarding both the power conditioning unit and the connected equipment from potential damage. These features enhance the overall reliability of power systems, critical for maintaining uptime in business operations.

In summary, the APC ACPSC3000 combines advanced power conditioning, extensive connectivity options, and a focus on energy efficiency, making it an essential asset for any organization that relies on consistent, high-quality power delivery to support their vital operations. Whether for data centers, networking, or industrial applications, this unit stands out as a comprehensive solution for managing electrical power challenges.
Top Page Image Contents