APC ACPCW40-150 Part 2 Product Standard Components Cabinet Construction, Refrigeration Components

Page 79

PART 2 PRODUCT

2.01STANDARD COMPONENTS

A.CABINET CONSTRUCTION

1.Exterior panels: Shall be 16 gauge steel sheet metal for maximum strength. All exterior panels and frame are powder coated for durability. Front panels shall have removable hinges with a locking handle. The side panels are double wall construction with insulation between. Interior panel wall shall be insulated with 1/2 in (1.5 lb) density fiber insulation. Insulation shall be completely protected from the air stream by the panel wall or air blocks. Exterior frame and panel color shall have color values: L = 14.02, a = 0.13, b = 3.68. Main bezel color shall have color values: L = 13.44, a = 0.43, b = –2.63.

2.Frame: Shall be constructed of welded 16 gauge formed steel for maximum strength.

3.All units shall have full service access from the front, allowing the units to be placed side by side.

B.ELECTRONICALLY COMMUTATED (EC) FANS

1.Electronically commutated (EC) Fans: The cooling unit shall be equipped with EC fan modules that have anti-vibration mountings to isolate each fan module from the structure of the cooling unit. The cooling unit shall be configured with a draw-through air pattern, to provide uniform air flow over the entire face of the coil.

C.REFRIGERATION COMPONENTS

1.Dual Circuit Refrigeration System: The system shall operate under the coordination of the main controller. Suction and discharge pressures shall be monitored and electronically controllable. Each refrigeration system shall consist of a fully-protected scroll compressor, evaporator coil mounted over an anti-fungal, formed-plastic condensate drip pan, electronic expansion valve, hot gas bypass valve, filter-drier, sight glass, high pressure switch, and low pressure switch.

2.Scroll Compressors: The unit shall contain scroll compressors for optimized performance, efficiency and reliability. The heavy-duty scroll compressors shall be designed for year-round usage. Scroll compressors shall have Advanced Scroll Temperature Protection (ASTP) to protect the Scroll Compressor from excessively high discharge gas temperatures. Compressor crankcase heaters shall be a standard feature for all units with the Scroll Technology.

3.Electronic Expansion Valve: The unit shall contain an electronic expansion valve that is used to modulate the amount of refrigerant flow within the system. The EEV shall be constructed of stainless steel with ceramic slide and port parts for highly accurate flow and minimal wear. EEV has a fast reaction time (1.5 seconds), optimizing saturation of the evaporator coil.

InRoom Precision AC Tech Data Manual

75

Page 78 Page 80
Image 79
Page 78 Page 80
Contents InRoom American Power Conversion Legal Disclaimer Contents Hgpv InRoom NomenclatureRoom Air Distribution ConfigurationsGeneral ModelsScalable Solution for Critical Environments Standard Features Optional Features Condensate Pump SKU  Unit Sub Base Plenum with Grills Downflow Discharge Plenums for 50 Hz InRoom Cooling UnitsCabinet Model Height Width Depth Standard Floorstands for InRoom 60Hz Cooling UnitsBowling Alley Floorstands for InRoom 60Hz Cooling Units Floorstands for InRoom 50 HzCooling Units Condensers Physical Data InRoom Standard Condensers 60 HzInRoom Low Temperature -30ºF Condensers 60 Hz InRoom High Temperature Condensers 60 Hz InRoom Condensers 50 Hz Receivers 60 Hz Safety Refrigerant Inlet Refrigerant OutletAt 20C 68F InRoom Receivers 50 HzDisplay Interface InRoom Direct Expansion Model Sizes Cabinet Size InRoom Model SizesFluid Cooled Glycol InRoom Cooling Unit ConfigurationsChilled Water Air Cooled DX Chilled Water CW 60Hz 60Hz Performance SpecificationsCabinet Size Air Cooled DX System 60Hz Air Cooled DX PA211 Cabinet Size PA311 PA452 PA612 PA862 MultiCool Air Cooled DX with CW 60Hz Operational Mode Air Cooled DXOperational Mode Chilled Water CW Information common to both modes Net Cooling Capacity PG211 PG311 PG452 PG612 PG862 Fluid Cooled Glycol 40% 60HzFluid Cooled Glycol 40% PG211 PG311 PG452 PG612 PG862 Fluid Cooled Glycol 0% 60Hz Fluid Cooled Glycol 0% PG211 PG311 PG452 PG612 PG862 Fluid Cooled Glycol 0% with CW 60Hz Operational Mode Fluid Cooled Glycol 0%Net Cooling Capacity -7.2C 45F EWT Information common to both modes Fluid Cooled Glycol 40% with CW 60Hz Operational Mode Fluid Cooled Glycol 40%Operational Mode Chilled Water CW Information common to both modes Fluid Cooled Glycol 40% with Economizer 60Hz Operational Mode Fluid Cooled Glycol 40% SummerOperational Mode Fluid Cooled Glycol 40% Winter PGE612 Cabinet Size Air Cooled DX and Fluid Cooled Glycol Electrical Data 60Hz InRoom Electrical SpecificationsWith Reheat Without Reheat Humidification Chilled Water CW Electrical DataChilled Water CW 50Hz 50Hz Performance SpecificationsFan Information Number of Fans Air Cooled DX System 50Hz 1050 x 453 x 47 G4 1050 x 398 x 47 G4 Upflow Filters mm MultiCool Air Cooled DX with CW 50Hz Operational Mode Air DXOperational Mode Chilled Water Information common to both modes Fluid Cooling Glycol 40% 50Hz Condenser Data 40% Glycol inlet temperature 40.5C 105F Fluid Cooled Glycol 0% 50Hz 48.5 71.5 101.8 145.0 206.7 Fluid Cooled Glycol 40% with CW 50Hz Operational Mode Chilled Water Information common to both modes Fluid Cooled Glycol 40% with Economizer 50Hz 19.8 67,450 29.3 99,845 38.5 890 With Reheat Without Compressor Data Humidification 50Hz InRoom Electrical SpecificationsApplication Limits Technical SpecificationsDesign Conditions Storage Transporting and StorageDelivery of the unit Moving the unitGuidelines for Installation Chilled Water Power Supply Inlet Location Piping Connections Water outlet, 42 mm 1 5/8 in ID Water inlet, 54 mm 2 1/8 in ID Water inlet, 70 mm 2 3/4 in ID 111 776 866 918 103 2510 Model PCW400 PCW660 PCW900 PCW1100 PCW1500 Upflow Chilled Water Cooling UnitsConsiderations Refrigerant PipingSubmittals WarrantyPart 1 General Summary Design RequirementsElectronically Commutated EC Fans Part 2 Product Standard Components Cabinet ConstructionRefrigeration Components Controller Programmable INPUT/OUTPUT Interface Module Main Power DisconnectElectrical Panel Evaporator COIL/CONDENSATE PANSteam Generating Humidifier Additional Programmable INPUT/OUTPUT I/OEvaporator Freeze Protection Predictive Failure WarningsSmoke Detector Flow SwitchOptional Components Floorstand PlenumSecondary Power Supply Condenser Part 3 Individual Systems AIR-COOLEDEconomizer WATER-COOLEDGLYCOL-COOLED Pump PackageFluid Cooler Terms of warranty One-Year Factory WarrantyNon-transferable warranty Exclusions Warranty claims Parts Warranty Procedures ClaimsPage 990-3299A-001 2009 APC Worldwide Customer Support

ACPCW40-150, ACPDX21-86 specifications

The APC ACPCW40-150 and APCDX21-86 are two innovative products from APC (American Power Conversion), known for their commitment to providing reliable power solutions for various applications. These models are tailored to meet the demands of modern businesses by focusing on efficiency, safety, and advanced technology.

The APC ACPCW40-150 is a 1500 VA line-interactive UPS (Uninterruptible Power Supply) system designed for protecting sensitive electronic equipment. This model features Automatic Voltage Regulation (AVR) which ensures consistent output voltage by correcting minor voltage fluctuations without switching to battery power. This capability extends battery life and enhances overall system reliability. The ACPCW40-150 is equipped with a user-friendly LCD interface providing real-time information on battery status, load capacity, and various operational parameters, making monitoring straightforward.

The ACPCW40-150 utilizes sine wave output to ensure compatibility with a broad range of devices, from servers to networking equipment. Its compact design makes it suitable for limited spaces, while multiple outlets allow for easy connection of various devices. The intelligent battery management system further optimizes charging cycles and enhances battery longevity, essential for organizations aiming to minimize downtime and maintenance costs.

On the other hand, the APCDX21-86 is a high-performance surge protector designed to safeguard electronic devices from power surges and spikes. This model boasts advanced surge protection technologies, ensuring that connected equipment remains safe even from the most sudden electrical disturbances. The APCDX21-86 includes multiple outlets, designed to support various devices ranging from consumer electronics to professional equipment, making it a versatile solution for both home and office environments.

One of the standout features of the APCDX21-86 is its EMI/RFI filtering, which prevents electromagnetic interference that can disrupt the functionality of sensitive electronics. The device is also equipped with diagnostic LEDs that provide immediate feedback on the protection status, allowing users to identify any issues promptly. Furthermore, its robust construction ensures that it can withstand typical wear and tear, making it a reliable choice for long-term use.

In summary, both the APC ACPCW40-150 and APCDX21-86 represent the forefront of power protection technology. Their main features not only cater to the need for uninterrupted power supply and equipment safeguarding but also integrate user-friendly technologies that promote efficiency and ease of use. Businesses and individuals alike can rely on these devices to enhance their operational resilience against power-related issues.
Top Page Image Contents